CHIPDRIVE CLOUD 4700F 905511 数据表

 

 

All Pseudo APDUs specific to Contactless Interface supported in the reader are explained in 
this section 

 

This command is used to read data from a Mifare card. Refer to section 3.2.2.1.8 of [PCSC3] 
for details. 

Read Binary 

0xFF 

0xB0 

Addr MSB 

Addr LSB 

- 

- 

xx 

 

P1 and P2 represent the block number of the block to be read, starting with 0 for sector 0, block 
0, continuing with 4 for sector 1, block 0 (sector no. x 4 + block no.) 

Regardless of the value given in Le, this command will always return the entire block content: 
16 bytes for Mifare Classic 
4 bytes for Mifare UL and UL C 

 

N bytes of block data 

SW1, SW2 

 

 

For a Mifare Classic 1K card with the following content: 

 

The following command will read the sixth block and yield the mentioned output: 

APDU: 

SW12: 

DataOut: 

 (16 bytes)