CHIPDRIVE CLOUD 4700F 905511 数据表
产品代码
905511
CLOUD
47
X
0
F
R
EFERENCE
M
ANUAL
42
6.2.11. PAPDU_ISO14443_PART3_PASS_THRU (Mifare Pass
Thru)
This command is used to send raw data using Type A standard framing to a card. CRC bytes
will be appended automatically. The reader will not add transport protocol data to the raw data
– e.g. PCB, NAD, CID etc.
will be appended automatically. The reader will not add transport protocol data to the raw data
– e.g. PCB, NAD, CID etc.
Command APDU:
Command
CLA
INS
P1
P2
P3
Data
Part 3 Pass-
through
FF
EF
Transmit
CRC
00
Lc
Data
P1 = 0x00 will transmit the CRC bytes form the card as is to the application.
P1 = 0x01 will discard the CRC bytes.
P1 = 0x01 will discard the CRC bytes.
Response APDU:
Data
Status Word
Data returned by card
SW1, SW2
6.2.12. PAPDU_ISO14443_PART4_PART3_SWITCH
(TCL
–
Mifare Switch)
This command switches the card state between TCL and MIFARE modes
Command APDU:
Command
CLA
INS
P1
P2
P3
Data
Part 4-Part 3
Switch
FF
F8
P1 00
00
-
P1 = 0x00 switches from MIFARE mode to TCL mode
P1 = 0x01 switches from TCL mode to MIFARE mode
P1 = 0x01 switches from TCL mode to MIFARE mode
Response APDU:
Data
Status Word
-
SW1, SW2
NOTE:
This command is mainly targeted at Mifare plus S0 cards. Mifare plus card at S0 level
get detected as Mifare memory card. In order to personalize these cards first it needs to be
switched to Part 4 mode. For this purpose this user command needs to be issued using
SCardTransmit function.
switched to Part 4 mode. For this purpose this user command needs to be issued using
SCardTransmit function.