CHIPDRIVE CLOUD 4700F 905511 数据表

 

 

This Escape command is used to identify if multiple Type A cards are detected in the field. 

 

The first byte of input buffer contains the escape code. 

 

 

 

 

This Escape command is used as a pass through to send FeliCa commands to FeliCa cards. 

 

The first byte of input buffer contains the escape code followed by FeliCa command to be sent 
to the card. At least 1 byte of command is required to be sent to the card. Otherwise an error 
will be reported. 

 

The response received from the FeliCa card is sent as output for this escape command. 

Escape code(0xE4) 

0x00 

Collision is not detected 

0x01 

Collision is detected 

Escape code (0xF3)  FeliCa command bytes