Nilfisk Alto ATTIX 30-2M PC Wet and Dry Vacuum Cleaner 30l 107400402 数据表

产品代码
107400402
下载
页码 26
14
ATTIX 30-40-50
1) 
Optional accessories / Option depending on model
Original Instruction
4.2.3  Suction power control 
1)
Switch 
position
Function
The suction 
power control 
switch allows 
precise 
adaptation of 
the suction 
power for 
different 
cleaning tasks.
4.2.4 Auto-On/Off-Operation 
- "auto" switch 
position 
1)
The vacuum cleaner is switched on 
and off by the power tool connected. 
Dirt is picked up from the source of 
dust immediately.
To comply with regulations, only ap-
proved dust producing tools should 
be connected.
The maximum power consumption 
of the connected electrical appli-
ance is stated in section "Technical 
data".
Before switching the switch to posi-
tion „auto“, ensure that the tool con-
nected to the appliance socket is 
switched off.
1.  Switch off the vacuum clean-
er.
2.  Switch off the power tool.
3.  Connect the power tool and 
the vacuum cleaner with a 
suction hose.
4.  Insert the plug of the power 
tool into the tool socket on 
the operating panel of the 
vacuum cleaner.
5.  Switch on the vacuum clean-
er. Switch in "auto" position.
6.  Switch on the power tool. The 
vacuum cleaner motor starts 
when the connected power 
tool is switched on.
When the power tool is 
switched off, the vacuum 
cleaner continues to run for 
a short moment so that any 
dust in the suction hose is 
conveyed to the filter bag.
auto
auto