Nilfisk Alto ATTIX 30-2M PC Wet and Dry Vacuum Cleaner 30l 107400402 数据表
产品代码
107400402
18
ATTIX 30-40-50
1)
Optional accessories / Option depending on model
Original Instruction
7 Maintenance
7.1 Maintenance
plan
After finishing work
When required
7.2.1
Emptying dirt tank
7.2.2
Replacing the filter bag
7.2.3
Replacing the disposal bag
7.2.4
Replacing filter element (Push&Clean)
7.2.5
Replacing filter element (XtremeClean)
7.2 Maintenance
work
7.2.1 Emptying the dirt tank
After emptying the tank: clean the
rim of the tank and the seals in the
intermediate ring and the upper sec-
tion of cleaner before refitting them.
If the seal or groove is dirty or dam-
aged, the suction performance will
be reduced.
Before reinserting the suction hose:
clean the inlet fitting and hose col-
lar.
rim of the tank and the seals in the
intermediate ring and the upper sec-
tion of cleaner before refitting them.
If the seal or groove is dirty or dam-
aged, the suction performance will
be reduced.
Before reinserting the suction hose:
clean the inlet fitting and hose col-
lar.
1. Switch off the vacuum clean-
er and pull the mains plug
out of the socket.
out of the socket.
2. Open the retaining clamps (A)
and remove the upper sec-
tion of the vacuum cleaner.
tion of the vacuum cleaner.
3. Tip out the collected dirt.
4. Dispose of the dirt in accord-
4. Dispose of the dirt in accord-
ance with legal regulations.
5. Attach the upper section of
the vacuum cleaner.
6. Close the retaining clamps
(B). Ensure that the retaining
clamps fit properly.
clamps fit properly.
A
A
A
A