Homematic 103584 Wireless control hub 103584 用户手册

36

37

The HomeMatic WebUI user interface is software-based and easy 
to use. You need it to carry out the following tasks:

•

Controlling and configuring HomeMatic devices

•

Connecting HomeMatic devices directly to other devices

•

Using HomeMatic devices in the central programs

You access the user interface via a web browser (see Section 7). 

If you do not have a network with a DHCP server, you can 
set the IP address of the Central Control Unit via the USB 
connection. Without a network, the Central Control Unit 
can only be used via USB. For more information on setup 
using a USB connection, refer to Section 10, “Notes on 
rectifying malfunctions”.

•  Once the Central Control Unit has been connected to the PC, the 

router and the power supply, open your web browser.

•  Enter the URL “

http://homematic-ccu2” in your browser. You will 

then be taken to the homepage of your WebUI. 

If you are not taken to the homepage when you enter 
“http://homematic-ccu2”, please follow the instructions in 
Section 10.

As soon as your Central Control Unit is connected to the network, 
the date and time are detected and set automatically.

If you do not have an Internet connection, the date and time must 
be set manually. To do this, proceed as follows:
•  Click on Settings 

 Control Panel in the user interface.