Sony SNC-P1 用户手册
Network Security Features
IP Filtering
With IP filtering, access to the SNC-P1 can be restricted to
one or more groups of selected users. Up to ten different
groups can be established by defining an IP address range for
each group.
one or more groups of selected users. Up to ten different
groups can be established by defining an IP address range for
each group.
Password Protection
User names and passwords can be assigned to allow three
levels of access. The administrator has complete access and
control of the cameras, while the other three levels of access
can be set to limit user privileges to functions such as viewing,
trigger control, etc.
levels of access. The administrator has complete access and
control of the cameras, while the other three levels of access
can be set to limit user privileges to functions such as viewing,
trigger control, etc.
Alarm Functions
Motion Detection/Alarm Trigger
The SNC-P1 is equipped with a built-in motion detection
function that can generate an alarm through an alarm-output
port or trigger various actions. Unlike conventional activity
detection, the SNC-P1 uses vector information to detect
motion, achieving robustness against noise components.
The SNC-P1 is also equipped with a sensor-input port that
can receive a trigger from an external sensor.
function that can generate an alarm through an alarm-output
port or trigger various actions. Unlike conventional activity
detection, the SNC-P1 uses vector information to detect
motion, achieving robustness against noise components.
The SNC-P1 is also equipped with a sensor-input port that
can receive a trigger from an external sensor.
Pre-/Post-Alarm Image Storage
With the built-in buffer memory, the SNC-P1 can store several
seconds of pre-alarm and post-alarm still images when an
alarm is triggered by the motion detection, the sensor input,
or both.
seconds of pre-alarm and post-alarm still images when an
alarm is triggered by the motion detection, the sensor input,
or both.
Image storage capacity:
MPEG 4 image: Approx. 30 s* (pre-/post- 15 s)
* when the image size is 320 x 240 at a frame rate of 30 fps and a bit
rate of 512 kbps
JPEG image: Approx. 10 s* (pre-/post- 5 s)
* when the image size is 320 x 240 at a frame rate of 15 fps and the
image quality is set to Level 3
Image Transfer Using FTP/SMTP
The pre-/post-alarm images stored at the time of an alarm
event can be transferred to an FTP server for later viewing.
Also, when the unit is set to JPEG mode, still images can be
sent to a specified e-mail address, enabling the user to view
images that were shot at the time of the alarm.
event can be transferred to an FTP server for later viewing.
Also, when the unit is set to JPEG mode, still images can be
sent to a specified e-mail address, enabling the user to view
images that were shot at the time of the alarm.
User-Friendly Controls
The SNC-P1 has been designed with special care to ensure
simple operation. Setup parameters are organised in a
two-layer menu system, categorised into an Easy Mode and
an Advanced Mode. Easy Mode allows access to only the
standard setup functions, while Advanced Mode allows
access to all setup functions. Settings can be easily adjusted
using a user-friendly GUI on the PC monitor.
simple operation. Setup parameters are organised in a
two-layer menu system, categorised into an Easy Mode and
an Advanced Mode. Easy Mode allows access to only the
standard setup functions, while Advanced Mode allows
access to all setup functions. Settings can be easily adjusted
using a user-friendly GUI on the PC monitor.
Setup Viewer – Easy mode
Setup Viewer – Advanced mode
Flexible Installation
The SNC-P1 can be placed on a desktop, wall-mounted,
or ceiling-mounted with the supplied camera stand.
Incorporating an electronic ‘Image Flip’ function, the SNC-P1
displays the image for proper upright viewing regardless of
the camera's orientation.
or ceiling-mounted with the supplied camera stand.
Incorporating an electronic ‘Image Flip’ function, the SNC-P1
displays the image for proper upright viewing regardless of
the camera's orientation.
Analogue Composite Video Output
The SNC-P1 has an analogue composite video output from
the mini-jack connector located on its side panel. This allows
camera images to be directly recorded or monitored by
connecting video equipment such as time-lapse recorders,
hard disk recorders, multiplexers, and monitors.
the mini-jack connector located on its side panel. This allows
camera images to be directly recorded or monitored by
connecting video equipment such as time-lapse recorders,
hard disk recorders, multiplexers, and monitors.
Features