Insys ISDN Terminal Adapter 4.0 11-02-01-02-00.015 用户手册
产品代码
11-02-01-02-00.015
38
Operating Manual INSYS ISDN TA 4.0
Version 2.02 – 01.04
AT&Z
displays
all
entries
Note:
see configurator command catab for further information
Fixed assignment for alarm functions
AT&Z
AT&Z
x=nn
x=1 target number for data connection
service center number for SMS dispatch (gateway)
x=2 mobile phone number SMS recipient for alarm 2
x=3 mobile phone number SMS recipient for alarm 1
AT#Z
Define own MSN
Defines the MSN nn (multiple subscriber number) for the data port.
If the number is set to “*“ (default), all incoming calls are acceptable.
The MSN can be displayed by the command AT#H or AT&V.
Defines the MSN nn (multiple subscriber number) for the data port.
If the number is set to “*“ (default), all incoming calls are acceptable.
The MSN can be displayed by the command AT#H or AT&V.
AT#Z
=nn sets
MSN
to
nn
AT#Z
displays currently set MSN
The MSN is automatically stored to non-volatile memory (with-
out issuing command AT&W).
out issuing command AT&W).
Note:
If 1TR6 D channel protocol is selected, only one, or the last digit
is valid.
is valid.
AT**DBITS
Number of data bits x on DTE interface (7,8)
Number of data bits x for asynchronous characters (7,default: 8)
Number of data bits x for asynchronous characters (7,default: 8)
AT**DBITS
=x
AT**PRTY
Parity of asynchronous characters
AT**PRTY=
AT**PRTY=
x Selects the parity for asynchronous characters:
x=0 no
parity
x=1 odd
parity
x=2
even
parity
7.2 ISDN specific AT commands
Only one command is allowed per line, default values are printed bold.
Command Description
AT**BSIZE
Set B channel block size
Defines the maximum length x of a data block transmitted or received in B chan-
nel (default: BSIZE = 2048).
Defines the maximum length x of a data block transmitted or received in B chan-
nel (default: BSIZE = 2048).
AT**BSIZE
=x
The value will be changed by setting the B channel protocol (ATBx).
AT**LLC
Set low layer compatibility (LLC)
Defines the LLC value for outgoing calls in hexadecimal format. In some situation
a specific LLC value is required to pass detailed information about the used B
channel protocol to the called party. This can be done by setting the LLC to a fix
value.
Defines the LLC value for outgoing calls in hexadecimal format. In some situation
a specific LLC value is required to pass detailed information about the used B
channel protocol to the called party. This can be done by setting the LLC to a fix
value.
AT**LLC
=-
Deleting of LLC-value (default: LLC is empty).
AT**LLC=
8890 Entering a new LLC value:
The value will be changed by setting the B channel protocol (ATBx).
AT**DTE
Set B channel Layer 2 address
Selects the Layer 2 link addresses. Only valid for protocols that are HDLC based
(X.75, LAPB).
Selects the Layer 2 link addresses. Only valid for protocols that are HDLC based
(X.75, LAPB).
AT**DTE
=0
Calling side reacts as DTE,
called side reacts as DCE (default, X.75 standard)
AT**DTE
=1
TA reacts as DTE (own address = 01)
AT**DTE
=3
TA reacts as DCE (own address = 03)