Drift Action Cam DRISTEALTH2 Stealth 2 DRISTEALTH2 数据表
产品代码
DRISTEALTH2
8
7
settings
mode selection
TIMELAPSE MODE
(Purple LED) The camera
will capture a series of still
images at a specified rate
when ACTION is pressed
on the camera or remote.
To stop recording, press
ACTION on the camera or
STOP on the remote.
will capture a series of still
images at a specified rate
when ACTION is pressed
on the camera or remote.
To stop recording, press
ACTION on the camera or
STOP on the remote.
PHOTO MODE
(Yellow LED) The camera
will capture still images
when ACTION is pressed
on the camera or remote.
The LED will blink red every
time a photo is taken (this
applies for Timelapse and
Photoburst modes also).
will capture still images
when ACTION is pressed
on the camera or remote.
The LED will blink red every
time a photo is taken (this
applies for Timelapse and
Photoburst modes also).
PHOTOBURST MODE
(Cyan LED) The camera
will capture a burst of still
images for an allotted
duration, when ACTION
on the camera or remote is
pressed (for best results, use
a Class 6 or higher micro
SD card).
will capture a burst of still
images for an allotted
duration, when ACTION
on the camera or remote is
pressed (for best results, use
a Class 6 or higher micro
SD card).
CAMERA SETTINGS
•EXPOSURE
-2.0 / -1.0 / 0 / +1.0 / +2.0
•SELF-TIMER
OFF / 3S / 5S / 10S
•WI-FI
OFF / ON
•VIDEO TAGGING
ON / OFF
•TAGGING INTERVAL
10S / 30S / 1MIN / 2MIN / 5MIN / 10MIN
•CAR DVR MODE
ON / M / OFF
•CAR DVR INTERVAL
1MIN / 3MIN / 5MIN / 10MIN / 15MIN
•VIDEO STANDARD
NTSC (30) / PAL (25)
•MIC SENSITIVITY
OFF / LOW / MED / HIGH
•SPEAKER VOLUME
OFF / LOW / MED / HIGH
•RC 1-1 (Remote Control 1-1)
ON / OFF
•RC 1-ALL (Remote Control 1-ALL)
ON / OFF
•RC LED
ON / OFF
•CAMERA LED
ON / OFF
•CAMERA OFF
OFF / 2MIN / 5MIN
•LCD BACKLIGHT
ON / OFF
•LCD BACKLIGHT TIMER OFF / 5S / 10S / 20S / 1MIN
•DATE
YEAR / MONTH / DAY
•DATE / TIME STAMP
ON / OFF
•LANGUAGE
[List of Languages]
•RESET SETTINGS
YES / NO
•FORMAT MEMORY CARD
YES / NO
• FIRMWARE VERSION
CURRENT VERSION
*Note: In settings mode, pressing the CYCLE button
once will move the selection down one setting.
Holding the CYCLE button will move the selection
back up the list to facilitate navigation.
VIDEO MODE
(Green LED) The camera
will record video when
ACTION is pressed on the
camera or remote. The
LED will flash red while
recording. Press ACTION on
the camera, or STOP on the
remote, to end recording.
will record video when
ACTION is pressed on the
camera or remote. The
LED will flash red while
recording. Press ACTION on
the camera, or STOP on the
remote, to end recording.
NTSC vs PAL
The camera records in
both NTSC and PAL video
standards (changeable from
the settings menu) NTSC
delivers frame rate intervals
of 30 (30, 60, 120) FPS
whereas PAL uses frame
rate intervals of 25 (25, 50,
100) FPS.
The camera records in
both NTSC and PAL video
standards (changeable from
the settings menu) NTSC
delivers frame rate intervals
of 30 (30, 60, 120) FPS
whereas PAL uses frame
rate intervals of 25 (25, 50,
100) FPS.