Drift Action Cam DRISTEALTH2 Stealth 2 DRISTEALTH2 数据表
产品代码
DRISTEALTH2
5
Using The Camera
Initial setup
1. Unscrew the rear hatch of the camera by hand.
2. Insert a micro SDHC card into the card slot, as above, until you hear a click
3. Connect the camera by the micro USB cable (provided) to a powered USB
port and charge for at least 4 hours before first use, until fully charged.
4. Replace the rear hatch, ensuring the arrow indicator points to the camera face
with the control buttons.
Powering on and off
Press and hold the ACTION button on the camera—the LED indicator and screen
will power on and display a welcome message.
will power on and display a welcome message.
To power off, hold the ACTION button for 3 seconds, or until the LED indicator
and screen power off.
and screen power off.
Charging
1. Connect the micro USB cable to the port at the rear of the camera and then
to a powered USB port in your computer, other USB device or USB power
adaptor (not included).
adaptor (not included).
!
If connected to a computer, the camera screen will show a USB symbol
!
If connected to a USB power adaptor, the screen will show ‘Charging...’
2. A full charge takes around 4 hours (min 1A)—once the camera is fully charged,
remove the micro USB cable and replace the rear hatch and screw closed
Battery life
At a temperature of 25°C (77°F), with all power saving features off and the camera
recording continuously, the battery will last for about 3 hours (1080p 30FPS, Wi-Fi
off), on a full charge (see Conserving Battery Life, p18).
recording continuously, the battery will last for about 3 hours (1080p 30FPS, Wi-Fi
off), on a full charge (see Conserving Battery Life, p18).
Using an external power supply
The camera can be powered by an external power supply such as a USB power
adapter, Drift Power Pack or Drift 12V Charger. We recommend you power off
your camera before plugging into any external power supply.
adapter, Drift Power Pack or Drift 12V Charger. We recommend you power off
your camera before plugging into any external power supply.
Press the ACTION button to begin normal usage when using an external supply.
If the external power is cut off for any reason during recording, the camera will
immediately start drawing power from the rechargeable battery instead and
continue recording, protecting your footage from file corruption.
immediately start drawing power from the rechargeable battery instead and
continue recording, protecting your footage from file corruption.
Selecting a micro SD card
The Drift Stealth 2 is compatible with
Micro SDHC cards of up to 32GB,
and of Speed Class 6 or above.
We recommend Class 10 cards for
recording HD video and system stability.
Micro SDHC cards of up to 32GB,
and of Speed Class 6 or above.
We recommend Class 10 cards for
recording HD video and system stability.
Below is a table of approximate video
recording times against card size.
recording times against card size.
Approximate Recording Time (30 FPS)
1080P
720P*
WVGA
1 GB
9min
12min
27min
2 GB
18min
24min
54min
4 GB
36min
48min
1h 48min
8 GB
1h 12min
1h 36min
3h 36min
16 GB
2h 24min
3h 12min
7h 12min
32 GB
4h 48min
6h 24min
14h 24min
Formatting a micro SD card
Formatting will remove all files from
a memory card. When using a new
card for the first time, formatting is
recommended. With the card inserted
in the camera:
a memory card. When using a new
card for the first time, formatting is
recommended. With the card inserted
in the camera:
1. Cycle to Camera Settings
2. Select ‘Format Memory Card’, press
ACTION and then confirm
Formatting may take a few moments
to complete—please be patient.
to complete—please be patient.
Removing a micro SD card
To remove the card, push it until you hear
a click. The card slot is spring loaded and
the card will slide from the slot.
a click. The card slot is spring loaded and
the card will slide from the slot.
Figure 7: Inserting the Micro SD card