Reely Quadrocopter configuration kit 205499 205499 数据表
产品代码
205499
Manual Configuration Kit QuadroCopter
Page 3
Deppending on the jumper settings in the Quadrocopter a different
set of Parameters will be used. To activate the user defined setting
the specific jumper has to be set to the correct position. If data is
read for the first time from the Quadrocopter the values can be out
of accepted ranges.
set of Parameters will be used. To activate the user defined setting
the specific jumper has to be set to the correct position. If data is
read for the first time from the Quadrocopter the values can be out
of accepted ranges.
•
Load Configuration: Loads a previously saved setting from the PC
•
Save Configuration: Saves the actual setting to the PC
•
Transfer Data: Transfers the actual displayed setting to the Quadrocopter
•
Read Data: Loads the actual setting from the Quadrocopter
•
OK: Ends edit mode and keeps the displayed settings
•
Cancel: Cancels the configuration
3. Remote Control
Parameter Expo and Factor for Nick, Roll and Gier
Picture 04: Settings for the remote control amplification
The Remote Control is sending a pulse width coded signal that is adapted to the value range -125/+125. These
value can be modified to enable a specific adjustment between the movement of the stick and the flight reaction.
With the utilization of an exponential function the steering does not react linear, but heavily damped in small stick
movements.
value can be modified to enable a specific adjustment between the movement of the stick and the flight reaction.
With the utilization of an exponential function the steering does not react linear, but heavily damped in small stick
movements.
This setting is often used for Nick and Roll steering to achieve a more sensitive control of the flight axes. The two
parameters (Expo and Factor) are used as factors for the settings.
parameters (Expo and Factor) are used as factors for the settings.
Values can be entered between 0 and 100 (0% and 100%).
What is the effect of Expo?
The parameter Expo defines the exponentional part of the behavior. it can be said in general that the higher this
value, the more is the raising of the resulting exponential curve. This means less reaction on small stick
movements, but more reaction on big movements with the control stick.
The parameter Expo defines the exponentional part of the behavior. it can be said in general that the higher this
value, the more is the raising of the resulting exponential curve. This means less reaction on small stick
movements, but more reaction on big movements with the control stick.