Absima POLYCARBONAT SPRAY PAINTZ SCHWARZ 150ML 3500005 数据表

产品代码
3500005
下载
页码 8
Legend to abbreviations used in the safety data sheet:
DPD:
Dangerous Preparations Directive
WGK 1:
slightly hazardous for water
WGK:
Water hazard class
WGK 2:
hazardous for water
ADR:
Accord  européen  relatif  au  transport  international  des  marchandises  Dangereuses
par Route
CLP:
Classification, Labelling and Packaging of chemicals
WGK3:
extremely hazardous for water
EINECS:
European INventory of Existing Commercial chemical Substances
CAS:
Chemical Abstracts Service
Nr.:
number
PTB:
persistent, toxic, bioaccumulative
zPzB:
very persistent and very bioaccumulative substances
TLV:
Threshold Limit Value
Legend to the R & H Phrases used in the safety data sheet:
R10:
Flammable.  
R11:
Highly
 flammable.  
R12:
Extremely
 flammable.  
R36:
Irritating
 to
 eyes.
R66:
Repeated exposure may cause skin dryness or cracking  
R67:
Vapours may cause drowsiness and dizziness
EUH066:
Repeated  exposure  may  cause  skin  dryness  or  cracking.  
H220  Flam.  Gas  1:
Extremely  flammable  gas.
H222  Flam.  Aerosol  1:
Extremely  flammable  aerosol.  
H225  Flam.  Liq.  2:
Highly  flammable  liquid  and  vapour.
H226  Flam.  Liq.  3:
Flammable  liquid  and  vapour.  
H229:
Pressurised  container:  May  burst  if  heated.
H319 Eye Irrit. 2:
Causes serious eye irritation.  
H336 STOT SE 3:
May cause drowsiness or dizziness.
Reason of revision, changes of following items:
not applicable
MSDS reference number:
ECM-103015,01
This  safety  information  sheet  has  been  compiled  in  accordance  with  annex  II/A  of  the  regulation  (EU)  No  453/2010.
Classification  has  been  calculated  in  accordance  with  the  European  directive  67/548/EWG,  1999/45/EC  and  regulation
1272/2008  with  their  respective  amendments.  It  has  been  compiled  with  the  utmost  care.  We  cannot,  however,  accept
responsibility for damage, of any kind, that may be caused by using these data or the product concerned.To use this preparation
for an experiment or a new application, the user must carry out a material suitability and safety study himself.
8/8