Futaba 6J F4103 数据表
产品代码
F4103
56
To set the GYRO mixing:
~ <#
# [ # !
assignable.
2) Prior to adjusting the gyro, ensure that the end point adjustments of channel 5 are set for 100% in both
directions. If not, please adjust accordingly.
3) Turn the transmitter on.
4) Press and hold the MODE button to access the programming mode. An audible double beep will be heard
and the default screen will change accordingly.
5) Press either the MODE key OR the END key to scroll through the function menus.
Continue pressing the MODE or END key until the gyro (GYRO) menu appears on
screen.
screen.
6) The right side of the LCD should indicate that the gyro mixing is inhibited, as
denoted by the flashing INH. Activate the gyro mixing by pressing and holding
*;* [<; # !' ; [ # + = !# !
changing to ON.
*;* [<; # !' ; [ # + = !# !
changing to ON.
< *;* [<;# !' ] ; '## =
{ [| !#
= {>[| !#
[ '&
~< _%%;"
!! ' ! & ;
+ $]]$]]
~ < *;* [<; # !' ''
gain for the upper switch position.
~< _%%;"
# ' ' ! &
]~< *;* [<;# !' ''
gain for the lower switch position.
11) Press the SELECT button one time to access the switch activation selection options for the gyro. The
_' * # !} ~ }= ~
'##
as you move in, or out, of the idle up. Typically a higher gain is set for normal (NOR) condition (hovering,
# ' ' =~ # ' '## + # ! } ' =
aerobatics).
as you move in, or out, of the idle up. Typically a higher gain is set for normal (NOR) condition (hovering,
# ' ' =~ # ' '## + # ! } ' =
aerobatics).