Jeti 4-channel receiver 2.4 GHz FHSS with Connector system JR 80001222 用户手册
产品代码
80001222
computer radio control system
EN
Every receiver is able to transmit the actual voltage supplied to the
on-board system (i. e. receiver voltage) without the need to connect
any additional external sensors. If you want to take advantage of
extended telemetry, connect a telemetry sensor to the EXT input of
the receiver. If you are want to operate several telemetry sensors
simultaneously with one receiver you must use one or more of the
Expander EX devices, which , when connected to the EXT receiver
input, gives you multiple inputs for telemetry sensors.
There are two ways to use Jeti telemetry. The EX telemetry is
available to owners of JETI DC/DS transmitters or the JETIBOX
profi. The 1st Generation Telemetry can be used by owners of the
TU, TG, TF etc. transmitter modules.
on-board system (i. e. receiver voltage) without the need to connect
any additional external sensors. If you want to take advantage of
extended telemetry, connect a telemetry sensor to the EXT input of
the receiver. If you are want to operate several telemetry sensors
simultaneously with one receiver you must use one or more of the
Expander EX devices, which , when connected to the EXT receiver
input, gives you multiple inputs for telemetry sensors.
There are two ways to use Jeti telemetry. The EX telemetry is
available to owners of JETI DC/DS transmitters or the JETIBOX
profi. The 1st Generation Telemetry can be used by owners of the
TU, TG, TF etc. transmitter modules.
4.1 EX Telemetry
This telemetry data is displayed according to user selections in the
DC/DS transmitters and the Jetibox profi. You will find more details
in actual instruction manuals of the given Duplex EX equipment.
DC/DS transmitters and the Jetibox profi. You will find more details
in actual instruction manuals of the given Duplex EX equipment.
4.2 - 1st Generation
Connect the JETIBOX to the transmitter module. Switch on the
transmitter and then connect the receiver voltage supply (see
chapter „Voltage supply“). The Tx heading appears in the JETIBOX
display and by pressing the push-button R (right button) twice
select the Mx menu. By pressing the push-button D (down) you will
enter the telemetry sensor or expander menu. You may leave the
telemetry sensor menu by pressing the push-button U(up) slightly
longer.
transmitter and then connect the receiver voltage supply (see
chapter „Voltage supply“). The Tx heading appears in the JETIBOX
display and by pressing the push-button R (right button) twice
select the Mx menu. By pressing the push-button D (down) you will
enter the telemetry sensor or expander menu. You may leave the
telemetry sensor menu by pressing the push-button U(up) slightly
longer.
4 Real Time Telemetry