Spektrum DX6i SPM6630 用户手册
产品代码
SPM6630
8
SPEKTRUM DX6i • RADIO INSTRUCTION MANUAL
EN
MUSTANG
5.0V
MDL6
DN06:00
A
B
C
D
E
E
F
G
G
H
I
I
J
K
K
Main Screen
A Transmitter Battery Charge Level
B Model Memory
C Model Name
D Model Type
E Elevator Trim (Mode 2)
F Time Count
G Aileron Trim
H Time Count Direction
I Rudder Trim
J Transmitter Battery Charge Amount
B Model Memory
C Model Name
D Model Type
E Elevator Trim (Mode 2)
F Time Count
G Aileron Trim
H Time Count Direction
I Rudder Trim
J Transmitter Battery Charge Amount
(an alarm sounds and the screen flashes
when battery charge gets down to 4.1V.)
when battery charge gets down to 4.1V.)
K Throttle Trim (Mode 2)
Warning Screen for Throttle Hold/Stunt Mode
If the Model Type is HELI and the F MODE or TH HOLD switch
are in the 1 position when the transmitter is powered on, the
alarm will sound. When the F MODE switch or THROTTLE HOLD
switch are on, an alarm sounds and warning shows on the LCD
screen. When all switches are moved to position 0, the display
returns to normal and the alarm stops.
are in the 1 position when the transmitter is powered on, the
alarm will sound. When the F MODE switch or THROTTLE HOLD
switch are on, an alarm sounds and warning shows on the LCD
screen. When all switches are moved to position 0, the display
returns to normal and the alarm stops.
Warning Screen for Low Transmitter Batteries
When the transmitter is powered on with low battery power (at
4.1-volts or less), a warning sounds and the screen flashes with
text to prevent use of the transmitter with low batteries. Power
off the transmitter and replace batteries to stop the sound and
flashing screen.
4.1-volts or less), a warning sounds and the screen flashes with
text to prevent use of the transmitter with low batteries. Power
off the transmitter and replace batteries to stop the sound and
flashing screen.
Warning screens
USING TRANSMITTER
Antenna
The transmitter antenna bends and turns at the hinge (A) and only bends
and turns to the front of the transmitter. The antenna cannot point to the
back of the transmitter. Turn antenna tip to point away from the model
and ground. Signals transmit strongest from the antenna shaft, not the tip.
and turns to the front of the transmitter. The antenna cannot point to the
back of the transmitter. Turn antenna tip to point away from the model
and ground. Signals transmit strongest from the antenna shaft, not the tip.
WARNING: Do not pick up the
transmitter by the antenna. Do not
transmitter by the antenna. Do not
alter or put weight on the antenna. Damage
to antenna parts can decrease transmitter
signal strength, which can result in loss of
model control, injury or property damage.
to antenna parts can decrease transmitter
signal strength, which can result in loss of
model control, injury or property damage.
A