Bresser Optik PC Ocular USB Telescope eyepiece 49-59000 产品宣传页
产品代码
49-59000
BRESSER PC Okular (Art.-Nr. 49-59000)
1. Camera head
2. 31.7 mm adapter
3. dust cover film
1. Installation of the camera
To install the driver please plug in the camera in a free USB port of you PC or
notebook.
The driver will be installed automatically. If necessary follow the instruction from your
Windows system.
2. Installation of the image processing software Photomizer SE
1. Insert the CD-ROM supplied in your CD or DVD drive. The installation menu opens automatically. If it doesn‘t, please switch to
Windows Explorer and select your CD drive. Start the file “setup.exe“ by double-clicking it.
2. A choice of languages is shown. Choose your preference. Confirm it by clicking „OK“.
3. At the „Welcome“ screen, click „Next“>“.
4. In the next screen you will be asked for the „Destination Folder“. Confirm your input with „Next>“.
5. The setup status screen shows. This advises current operation status with a progress bar. This may take a few minutes.
6. The „Completed the Photomizer Setup Wizard“ screen shows. Click here on „Finish“.
3. Using the camera
First remove the dust cover film (3).
Screw the 31.7 mm adapter (2) on the camera head (1).
Now you can put the camera with the 31.7 mm into the eyepiece holder from your telescope.
4. Showing and saving MikrOkular images on your PC
1. Start the Photomizer SE Software
2. Click „Open camera“
3. If you have more than one device connected up select the one you want from the choice offered. Click „SoC PC-Camera“ or
„MikrOkular“. Omit this step if you only have a single device connected up.
4. The camera image should now be visible on your screen. Focus the microscope image.
5. Click „Capture“ to record an image. It will then be shown on the right.
6. Click on it to select it and then click „Transfer image“.
7. This takes you to the Photomizer SE software.
8. To save the image you’ve made please click “File” and “Save as”. Here you can choose a folder and you can give your image a
name.
The Photomizer SE software
If you need help in the „Photomizer SE“ programme click „?“ and then „Open help“. If you need further assistance please visit the
maker‘s home page at www.photomizer.net
Components:
Camera head, 31.7 mm adapter, USB cable (180 cm), Software CD-ROM
System requirements:
Intel X86 processor with at least 2.0 GHz speed, 200 MB hard disc space, 512 MB RAM memory, Windows XP, Vista or Windows 7
and a free USB port.
4. Showing and saving MikrOkular images on your PC
1. Start the Photomizer SE Software
2. Click „Open camera“
3. If you have more than one device connected up select the one you want from the choice offered. Click „SoC PC-Camera“ or
„MikrOkular“. Omit this step if you only have a single device connected up.
4. The camera image should now be visible on your screen. Focus the microscope image.
5. Click „Capture“ to record an image. It will then be shown on the right.
6. Click on it to select it and then click „Transfer image“.
7. This takes you to the Photomizer SE software.
8. To save the image you’ve made please click “File” and “Save as”. Here you can choose a folder and you can give your image a
name.
The Photomizer SE software
If you need help in the „Photomizer SE“ programme click „?“ and then „Open help“. If you need further assistance please visit the
maker‘s home page at www.photomizer.net
Components:
Camera head, 31.7 mm adapter, USB cable (180 cm), Software CD-ROM
System requirements:
Intel X86 processor with at least 2.0 GHz speed, 200 MB hard disc space, 512 MB RAM memory, Windows XP, Vista or Windows 7
and a free USB port.
Meade Instruments Europe GmbH & Co. KG
D-46414 Rhede • Gutenbergstr. 2 • Germany
Tel. ++49 (02872) 80 74 310 • Fax ++49 (02872) 80 74 333 • www.meade.de
Tel. ++49 (02872) 80 74 310 • Fax ++49 (02872) 80 74 333 • www.meade.de