Dremel 940-3 F013 0940 JA 用户手册

6

PICTURE 1a/1b
1. Nozzle
2. Glue 

stick

3. Feed 

trigger

4. Stand
5. Temperature 

switch

PICTURE 1c 
6. 

On/off switch with indicator light

7. Detachable 

cord 

8. 

Stand release button

9. Exchangeable 

nozzle

SWITCHING ON:
Plug Dremel Glue Gun into a standard 230 V 
electrical outlet.
Models 910, 920 and 930:
• 

Once the glue gun is plugged in, it is on and 
heating.

Dual Temperature Glue Gun Model 930:
• 

Adjust switch (5) to low or high temperature 
setting to turn the Glue Gun on. Consult with 
glue stick package to determine appropriate 
temperature. 

Model 940: 
• 

Connect the power cord to the glue gun.

• 

Switch the glue gun on with the main switch. 
Indicator light (6) will let you know the glue gun 
is on and heating.

SWITCHING OFF:
• 

Pull the mains plug (models 910, 920 and 930).

• 

Switch the unit ON/OFF with switch (6; model 
940). Pull the mains plug.

Allow the unit to cool completely before storing. The 
hot nozzle can cause damage.

PREPARATIONS FOR GLUING
The surfaces to be glued must be clean, dry and 
free of grease. Roughen smooth surfaces before 
gluing. DO NOT USE INFLAMMABLE SOLVENTS FOR 
CLEANING! The ambient temperature and the work 
piece to be glued must not be colder than +5 °C or 
warmer than +50 °C. Warm rapidly cooling materials 
(e.g., steel) for better adhesion.

GLUING
DANGER OF BURNING! The glue and the nozzle tip (1) 
become very hot. Do not allow the nozzle tip or hot 
glue to come into contact with persons or animals. If 
hot glue touches the skin, immediately hold the spot 
for some minutes under a stream of cold water. Do not 
try to remove the glue from the skin. 
Models 910, 920 and 930: 
• 

 Allow glue gun to reach operating temperature 
before using (±5mins).
Insert the glue stick (2). Press the feed 
trigger (3). 

Model 940: 
• 

 Once the cord is detached, the glue gun 
remains operable for 5mins, before it needs to 
heat up.

NOTE: For your first use, you may need to load up to 
two full glue sticks before glue begins to flow.
• 

 Squeeze trigger (3) to apply glue onto desired 
surface. 

• 

 Apply parts together.

• 

 Allow glue to cool before handling object or 
surface.

TIP: Dremel also supplies glitter and colour sticks 
for decorative purposes. These sticks have been 
specially developed for creative projects and low 
temperature (105 °C). 
The colour sticks can also be used for sealing 
decorations. To be able to quickly change colours, it 
is recommended to cut the sticks into 3 cm pieces 
before inserting into the Glue Gun.

165°C

105°C

165°C
105°C

195°C

GG01 Multipurpose glue, 7mm

-

-

GG02 Multipurpose glue, 7mm

-

-

GG03 Woodglue, 7mm

-

-

GG04 Glitter glue, 7mm

-

-

GG05 Colour glue, 7mm

-

-

GG11 Multipurpose glue, 11mm

-

-

-

GG13 Woodglue, 11mm

-

-

-

 

2610399275-GlueGun-EU-0610.indb   6

10399275-GlueGun-EU-0610.indb   6

3-6-2010   12:47:04

3-6-2010   12:47:04