Kingston Technology 2GB, 667MHZ, DDR2, SODIMM KVR667D2SO/2GR 数据表
产品代码
KVR667D2SO/2GR
Memory Module Specification
DESCRIPTION:
This document describes ValueRAM's 256M x 64-bit 2GB (2048MB) CL5 DDR2-667
SDRAM (Synchronous DRAM) memory module. The components on this module include
sixteen 128M x 8-bit DDR2-667 SDRAM in FBGA packages. This 200-pin SODIMM uses
gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as
follows:
SDRAM (Synchronous DRAM) memory module. The components on this module include
sixteen 128M x 8-bit DDR2-667 SDRAM in FBGA packages. This 200-pin SODIMM uses
gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as
follows:
FEATURES:
Clock Cycle Time (tCK) CL=5
3ns (min.) / 8ns (max.)
Row Cycle Time (t
RC
)
54ns (min.)
Refresh to Active/Refresh Command Time (tRFC)
127.5ns
Row Active Time (tRAS)
39ns (min.) / 70,000ns (max.)
Single Power Supply of
+1.8V (+/- .1V)
Power
1.944 W (operating)
UL Rating
94 V - 0
Document No. VALUERAM0561-001.A00
11/15/07
Figure 1: KVR667D2SO/2GR 200-Pin SODIMM
KVR667D2SO/2GR
2GB 256M x 64-Bit DDR2-667
CL5 200-Pin SODIMM
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 30.00mm.
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 30.00mm.
(units = millimeters)