Microchip Technology PICkit 3 Debug Express Debugger/Programmer (DV164131) PICkit 3 Debug Express DV164131 用户手册
产品代码
DV164131
PICkit 3 Programmer-To-Go
2013 Microchip Technology Inc.
DS52116A-page 41
5.4.2
Download to PICkit 3 Complete
Use the down arrow next to the Make and Program Device icon and select
“Programmer To Go PICkit3” (see Figure 5-4) to execute an image transfer to the
PICkit 3 unit. Once the image is stored in the PICkit 3, you no longer need MPLAB X
IDE or a PC to program a device. You can take the PICkit 3 to other locations that may
not have a computer and program a device with the push of a button.
“Programmer To Go PICkit3” (see Figure 5-4) to execute an image transfer to the
PICkit 3 unit. Once the image is stored in the PICkit 3, you no longer need MPLAB X
IDE or a PC to program a device. You can take the PICkit 3 to other locations that may
not have a computer and program a device with the push of a button.
FIGURE 5-4:
DOWNLOAD TO PICKIT 3
After you download the image, the Output window displays a message when the
download is complete:
download is complete:
“PICkit 3 is now in Programmer to go mode. The next time you connect to this
unit, you will have the choice to take it out of Programmer to go mode.”
unit, you will have the choice to take it out of Programmer to go mode.”
The PICkit 3 unit’s “Active” LED should be blinking to indicate it is in
Programmer-To-Go mode and ready to program.
Disconnect the PICkit 3 from the PC USB port. When any USB power source is applied,
the PICkit 3 unit will power up in Programmer-To-Go mode, indicated by the blinking
“Active” LED.
Programmer-To-Go mode and ready to program.
Disconnect the PICkit 3 from the PC USB port. When any USB power source is applied,
the PICkit 3 unit will power up in Programmer-To-Go mode, indicated by the blinking
“Active” LED.