Texas Instruments C2000 Digital Power Experimenter Kit TMDSDCDC2KIT TMDSDCDC2KIT 数据表
产品代码
TMDSDCDC2KIT
1
Overview
Quick Start Guide
SPRUFR6 – June 2008
Digital Power Experimenter Kit
A great way to experiment and learn about digital power control, the Digital Power Experimenter Kit
contains a power motherboard which accepts any of the plug-in controlCARDs. It is based on the TI
PowerTrain™ modules, small and efficient 10-Amp synchronous buck power stages, which are directly
interfaced with and controlled by the TMS320F28x digital signal controller (DSC). The kit is self-contained,
providing a static or an active (switched) load. Voltage measurements of both outputs can be taken with
the built-in digital voltmeter. The board requires a single 9-V DC supply and has a separately switched and
fused rail as the input voltage bus to the Buck modules. This allows for safe, convenient software
experimentation and debug without the risk of hardware damage.
contains a power motherboard which accepts any of the plug-in controlCARDs. It is based on the TI
PowerTrain™ modules, small and efficient 10-Amp synchronous buck power stages, which are directly
interfaced with and controlled by the TMS320F28x digital signal controller (DSC). The kit is self-contained,
providing a static or an active (switched) load. Voltage measurements of both outputs can be taken with
the built-in digital voltmeter. The board requires a single 9-V DC supply and has a separately switched and
fused rail as the input voltage bus to the Buck modules. This allows for safe, convenient software
experimentation and debug without the risk of hardware damage.
SPRUFR6 – June 2008
Digital Power Experimenter Kit
1