Texas Instruments LM96080 Evaluation Board LM96080EB/NOPB LM96080EB/NOPB 数据表
产品代码
LM96080EB/NOPB
SNAS465D – SEPTEMBER 2009 – REVISED MARCH 2013
LM96080 System Hardware Monitor with 2-Wire Serial Interface
Check for Samples:
1
FEATURES
DESCRIPTION
LM96080, compatible to LM80, is a hardware monitor
2
•
Local Temperature Sensing
that contains a 10-bit delta-sigma ADC capable of
•
7 Positive Voltage Inputs with 10-bit
measuring 7 positive voltages and local temperature.
Resolution
The LM96080 also measures the speed of two fans
•
2 Programmable Fan Speed Monitoring Inputs
and includes other hardware monitoring on an I
2
C®
interface. The LM96080 includes a sequencer that
•
2.5 mV LSb and 2.56V Input Range
performs WATCHDOG window comparisons of all
•
Chassis Intrusion Detector Input
measured values and its interrupt outputs become
•
WATCHDOG Comparison of All Monitored
active when any values exceed the programmed
Values
limits.
•
Separate Input to Show Status in Interrupt
The LM96080 is especially suited to interface to both
Status Register of Additional External
linear and digital temperature sensors. The 2.5 mV
Temperature Sensors Such as the LM26/27,
LSb (least significant bit) and 2.56 volt input range is
ideal for accepting inputs from a linear sensor such
ideal for accepting inputs from a linear sensor such
LM56/57, LM73, or LM75
as the LM94022. The BTI is used as an input from
•
I
2
C Serial Bus Interface Compatibility,
either digital or thermostat sensors such as LM73,
Supports Standard Mode, 100 kbits/s, and Fast
LM75, LM56, LM57, LM26, LM27, LM26LV, or other
Mode, 400 kbits/s
LM96080.
•
Shutdown Mode to Minimize Power
The LM96080 supports Standard Mode (Sm, 100
Consumption
kbits/s) and Fast Mode (Fm, 400 kbits/s) I
2
C interface
•
Programmable RST_OUT/OS Pin: RST_OUT
modes of operation. LM96080 includes an analog
Provides a Reset Output; OS Provides an
filter on the I
2
C digital control lines that allows
Interrupt Output Activated by an
improved noise immunity and supports TIMEOUT
Overtemperature Shutdown Event
reset function on SDA and SCL that prevents I
2
C bus
lockup. Three I
2
C device address pins allow up to 8
•
Software and Pin Compatible with the LM80
parts on a single bus.
APPLICATIONS
The LM96080's 3.0V to 5.5V supply voltage range,
low supply current, and I
low supply current, and I
2
C interface make it ideal for
•
Communications Infrastructure
a wide range of applications. Operation is ensured
•
System Thermal and Hardware Monitoring for
over the temperature range of (
−
40)°C
≤
T
A
≤
Servers
+125°C. The LM96080 is available in a 24-pin
TSSOP package.
TSSOP package.
•
Electronic Test Equipment and
Instrumentation
Instrumentation
•
Office Electronics
KEY SPECIFICATIONS
•
Total Unadjusted Error ±1 %FS (Max)
•
Differential Non-Linearity ±1 Lsb (Max)
•
Supply Voltage Range +3.0 V to +5.5 V
•
Supply Current (Operating) 0.370 mA Typ
•
Supply Current (Shutdown) 0.330 mA Typ
•
ADC Resolution 10 Bits
•
Temperature Resolution 0.5°C/0.0625°C
•
Temperature Accuracy ±3°C (Max)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2009–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.