Texas Instruments PCM2707 Evaluation Module PCM2707EVM-U PCM2707EVM-U 数据表

产品代码

PCM2707EVM-U

Burr-Brown Audio

PCM2704C, PCM2705C
PCM2706C, PCM2707C

www.ti.com

SBFS036A – AUGUST 2011 – REVISED JULY 2012

Stereo Audio DAC with USB Interface,

Single-Ended Headphone Output and S/PDIF Output

Check for Samples:

PCM2704C

PCM2705C

PCM2706C

PCM2707C

FEATURES

23456

• On-Chip USB Interface:

–

Up to Eight Human Interface Device (HID)
Interfaces (Model and Setting Dependent)

–

No Dedicated Device Driver Needed

–

Suspend Flag

–

Full-Speed Transceivers

–

S/PDIF Out with SCMS

–

Fully Compliant with USB 2.0 Specification

–

External ROM Interface (PCM2704C/6C)

–

USB 1.1 Descriptors with USB Audio
Class Support

–

Serial Programming Interface
(PCM2705C/7C)

–

Certified by USB-IF

–

S™ Interface (Selectable on

–

Partially Programmable Descriptors

PCM2706C/7C)

–

Adaptive Isochronous Transfer for

•

Packages:

Playback

–

28-Pin SSOP (PCM2704C/5C)

–

Bus-Powered or Self-Powered Operation

–

32-Pin TQFP (PCM2706C/7C)

•

Sampling Rates: 32 kHz, 44.1 kHz, 48 kHz

•

On-Chip Clock Generator with Single 12-MHz

APPLICATIONS

Clock Source

•

USB Headphones

•

Single Power Supply:

•

USB Audio Speaker

–

Bus-Powered: 5 V, Typical (V

BUS

)

•

USB CRT/LCD Monitor

–

Self-Powered: 3.3 V, Typical

•

USB Audio Interface Box

•

16-Bit Delta-Sigma Stereo DAC

•

USB-Featured Consumer Audio Product

–

Analog Performance at 5 V (Bus-Powered),
3.3 V (Self-Powered):

DESCRIPTION

–

THD+N: 0.006% R

> 10 k

, Self-

The PCM2704C/5C/6C/7C are TI's single-chip USB

Powered

stereo audio digital-to-analog converters (DACs) with

–

THD+N: 0.025% R

= 32

USB 2.0 compliant full-speed protocol controller and

–

SNR = 98 dB

S/PDIF. The USB-protocol controller works with no
software code, but USB descriptors can be modified

–

Dynamic Range: 98 dB

in some areas (for example, vendor ID/product ID)

–

= 12 mW, R

= 32

through the use of an external ROM (PCM2704C/6C)

–

Oversampling Digital Filter

or serial peripheral interface (SPI) (PCM2705C/7C).
The PCM2704C/5C/6C/7C also employ SpAct™

–

Passband Ripple = ±0.04 dB

architecture, TI's unique system that recovers the

–

Stop-Band Attenuation = –50 dB

audio clock from USB packet data. On-chip analog

–

Single-Ended Voltage Output

phase-locked

loops

(PLLs)

with

SpAct

enable

playback with low clock jitter.

–

Analog LPF Included

•

Multiple Functions:

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

SpAct is a trademark of Texas Instruments.

System Two, Audio Precision are trademarks of Audio Precision, Inc.

SPI is a trademark of Motorola, Inc.

S, I

C are trademarks of NXP Semiconductors.

All other trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.