Texas Instruments TAS5711PHP Evaluation Module TAS5711PHPEVM TAS5711PHPEVM 数据表
产品代码
TAS5711PHPEVM
Using the EVM Software
www.ti.com
Figure 15. Time Constants Button
Time constants: Select the time constants to adjust the energy, attack, and decay filters (
4.6.1
MODULATION SCHEMES
Common Configurations:
1. 2.1 SE AD + BTL AD
2. 2.1 SE AD + BTL BD
Note:
AD : AD Modulation-Outputs are 180° out of phase
BD : BD Modulation
BTL : Bridge-Tied Load
4.6.1.1
2 .1 AD (Default)
1. Set up the hardware, and select the TAS5711 tab.
2. GDE: Target > Connect.
3. Check the 2.1 box in GUI.
4. Finally, uncheck the shutdown box to bring the device out of Shutdown mode, and adjust the Master
2. GDE: Target > Connect.
3. Check the 2.1 box in GUI.
4. Finally, uncheck the shutdown box to bring the device out of Shutdown mode, and adjust the Master
Volume as desired.
4.6.1.2
2.1 SE AD + BTL BD
1. Set up the hardware, and select the TAS5711 tab .
2. Select the Input MUX from GDE. In the properties window, select BD Mode
2. Select the Input MUX from GDE. In the properties window, select BD Mode
14
TAS5711EVM Evaluation Module
SLOU280 – January 2009
Copyright © 2009, Texas Instruments Incorporated