Texas Instruments Evaluation Module for TPS5432 3A Synchronous Step-Down Converter TPS5432EVM-116 TPS5432EVM-116 数据表
![Texas Instruments](https://files.manualsbrain.com/attachments/b46f99d826b2b0e0e5f558c5fb6483942eb9216b/common/fit/150/50/c15ea36eb1fb1cce99a3b94668675bfc78ce832d8d727d9a7bb51a125510/brand_logo.gif)
产品代码
TPS5432EVM-116
V = 200 mV/div (ac coupled)
IN
Time = 1 µs/div
PH = 2 V/div
V
= 1 V/div
OUT
Time = 2 ms/div
EN = 2 V/div
V
= 5 V/div
IN
SS = 2 V/div
Test Setup and Results
2.8
Input Voltage Ripple
The TPS5432EVM-116 input voltage ripple is shown in
. The output current is the rated full load
of 3 A and V
IN
= 5 V. The ripple voltage is measured directly across the input capacitors.
Figure 8. TPS5432EVM-116 Input Ripple
2.9
Powering Up
2.9.1
Power Up Relative to V
IN
The start-up waveform shown in
shows start-up is relative to VIN rising. The input voltage is
initially applied, and when the input reaches the undervoltage lockout threshold, the start-up sequence
begins and the output ramps up at the externally set rate toward the set value of 1.8 V. The input voltage
for this plot is 5 V with a 1
begins and the output ramps up at the externally set rate toward the set value of 1.8 V. The input voltage
for this plot is 5 V with a 1
Ω
load.
Figure 9. TPS5432EVM-116 Start-Up Relative to V
IN
8
TPS5432EVM-116 3-A, SWIFT™ Regulator Evaluation Module
SLVU674 – March 2012
Copyright © 2012, Texas Instruments Incorporated