Texas Instruments TPA3130D2 Evaluation Module TPA3130D2EVM TPA3130D2EVM 数据表
产品代码
TPA3130D2EVM
LC Filter
LC Filter
Left
Right
4.5 V-26 V
PSU
Tuner AM/FM
CD/ MP3
Aux in
Left
Right
Audio Processor
And control
TPA 3116 D2
AM /FM Avoidance
Control
FAULTZ
SDZ
MUTE
Sync
Capable of synchronizing to other devices
GAIN/SLV
GAIN control and Master /Slave setting
AM2,1,0
PLIMIT
Power Limit
PBTL
Detect
SLOS708C – APRIL 2012 – REVISED NOVEMBER 2013
15W,30W,50W Filter-Free Class-D Stereo Amplifier Family with AM Avoidance
Check for Samples:
,
1
FEATURES
DESCRIPTION
The TPA31xxD2 series are stereo efficient, digital
•
Supports Multiple Output Configurations
amplifier power stage for driving speakers up to
–
2×50-W into a 4-
Ω BTL Load at 21 V
100W/2
Ω in mono. The high efficiency of the
(TPA3116D2)
TPA3130D2 allows it to do 2x15W without external
–
2×30-W into a 8-
Ω BTL Load at 24 V
heat sink on a single layer PCB. The TPA3118D2 can
even run 2x30W/8
even run 2x30W/8
Ω without heat sink on a dual layer
(TPA3118D2)
PCB. If even higher power is needed the TPA3116D2
–
2×15-W into a 8-
Ω BTL Load at 15 V
does 2x50W/4
Ω with a small heat-sink attached to its
(TPA3130D2)
top side PowerPad. All three devices share the same
•
Wide Voltage Range: 4.5 V – 26 V
footprint enabling a single PCB to be used across
different power levels.
different power levels.
•
Efficient Class-D Operation
–
>90% Power Efficiency Combined with Low
The
TPA31xxD2
advanced
oscillator/PLL
circuit
Idle Loss Greatly Reduces Heat Sink Size
employs a multiple switching frequency option to
avoid AM interferences; this is achieved together with
avoid AM interferences; this is achieved together with
–
Advanced Modulation Schemes
an option of Master/Slave option, making it possible
•
Multiple Switching Frequencies
to synchronize multiple devices.
–
AM Avoidance
The TPA31xxD2 devices are fully protected against
–
Master/Slave Synchronization
faults
with
short-circuit
protection
and
thermal
–
Up to 1.2 MHz Switching Frequency
protection as well as over-voltage, under-voltage and
DC protection. Faults are reported back to the
DC protection. Faults are reported back to the
•
Feedback Power Stage Architecture with High
processor to prevent devices from being damaged
PSRR Reduces PSU Requirements
during overload conditions.
•
Programmable Power Limit
•
Differential/Single-Ended Inputs
Simplified Application Circuit
•
Stereo and Mono Mode with Single Filter Mono
Configuration
Configuration
•
Single Power Supply Reduces Component
Count
Count
•
Integrated Self-Protection Circuits Including
Over-Voltage, Under-Voltage, Over-
Temperature, DC-Detect, and Short Circuit
with Error Reporting
Over-Voltage, Under-Voltage, Over-
Temperature, DC-Detect, and Short Circuit
with Error Reporting
•
Thermally Enhanced Packages
–
DAD (32-pin HTSSOP Pad-up)
DEVICE
POWER
HTSSOP 32-PIN
–
DAP (32-pin HTSSOP Pad-down)
TPA3130D2
2 x 15W/8
Ω
Pad down (DAP)
•
–40°C to 85°C Ambient Temperature Range
TPA3118D2
2 x 30W/8
Ω
Pad down (DAP)
TPA3116D2
2 x 50W/4
Ω
Pad up (DAD)
APPLICATIONS
•
Mini-Micro Component, Speaker Bar, Docks
•
After-Market Automotive
•
CRT TV
•
Consumer Audio Applications
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2012–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.