Microchip Technology DM164130-7 数据表
F1 LV Evaluation Platform Overview
2012 Microchip Technology Inc.
DS41629A-page 15
FIGURE 1-1:
1
11
12
17
18
2
3
4
5
6
7
8
9
16
10
13
15
14
1. Motor Parameters pull-down menu. Save
and recall to and from disc.
2. Speed control (relative 0 to 255):
• Commutation rate in open loop
• Drive level in closed loop
• Drive level in closed loop
3. Zero cross advance/retard (BLDC only).
4. Motor drive voltage control (open loop). In
4. Motor drive voltage control (open loop). In
BLDC closed loop this control reverts to a
balance control.
balance control.
5. BLDC open-loop single-step button.
6. Open/closed-loop control selection (BLDC
6. Open/closed-loop control selection (BLDC
and stepper motors only).
7. Panic STOP button – Forces drive and com-
mutation to zero.
8. Motor direction selection.
9. Number of motor poles (BLDC only).
10. Serial port selection.
11. Serial link Open/Close button.
12. Motor type indicator.
13. Motor RPM – click label to update.
14. Initial drive level for start-up.
15. Initial speed setting for start-up.
16. PC Software version.
17. F1 LV Evaluation Platform software version.
18. Run time and static motor parameters tabs.
9. Number of motor poles (BLDC only).
10. Serial port selection.
11. Serial link Open/Close button.
12. Motor type indicator.
13. Motor RPM – click label to update.
14. Initial drive level for start-up.
15. Initial speed setting for start-up.
16. PC Software version.
17. F1 LV Evaluation Platform software version.
18. Run time and static motor parameters tabs.