Microchip Technology MA330016 数据表

© 2007-2011 Microchip Technology Inc.

DS70290J-page 137

The Timer1 module is a 16-bit timer, which can serve
as the time counter for the real-time clock, or operate
as a free-running interval timer/counter. Timer1 can
operate in three modes:
• 16-bit Timer
• 16-bit Synchronous Counter
• 16-bit Asynchronous Counter

Timer1 also supports these features:
• Timer gate operation
• Selectable prescaler settings
• Timer operation during CPU Idle and Sleep 

modes

• Interrupt on 16-bit Period register match or falling 

edge of external gate signal

 illustrates a block diagram of the 16-bit

timer module.
To configure Timer1 for operation:
1.

Set the TON bit (= 1) in the T1CON register.

2.

Select the timer prescaler ratio using the
TCKPS<1:0> bits in the T1CON register.

3.

Set the Clock and Gating modes using the TCS
and TGATE bits in the T1CON register.

4.

Set or clear the TSYNC bit in the T1CON
register to select synchronous or asynchronous
operation.

5.

Load the timer period value into the PR1
register.

6.

If interrupts are required, set the interrupt enable
bit, T1IE. Use the priority bits, T1IP<2:0>, to set
the interrupt priority.

Note 1: This data sheet summarizes the features

of the dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 family of devices. It
is not intended to be a comprehensive
reference source. To complement the
information in this data sheet, refer to
Section 11. “Timers” (DS70205) of the
“dsPIC33F/PIC24H Family Reference
Manual”, which is available from the
Microchip web site:
 (

www.microchip.com

).

2: Some registers and associated bits

described in this section may not be
available on all devices. Refer to

 in

this data sheet for device-specific register
and bit information.

         

TON 

SOSCI

SOSCO/

PR1

Set T1IF

Equal

Comparator

 

TMR1

Reset

SOSCEN

1

0

TSYNC

Q

Q

D

CK

TCKPS<1:0>

Prescaler

1, 8, 64, 256

2

TGATE

T

CY

1

0

T1CK

TCS

1x

01

TGATE

00

Sync

Gate

Sync