Texas Instruments BOOSTXL-SENSHUB 数据表
Compile, Download, and Debug
3.3
Compile, Download, and Debug
The project is now in the workspace and ready to be compiled, downloaded, and debugged. To do these
steps, click on the debug icon at the top left of the CCS window. Make sure a USB cable is connected to
the top of the board for debugging. Note: A second USB cable (not provided) is required in order to
perform the air mouse functions. Plug the second cable into the side USB device port. Either USB
connection may be used to power the board.
steps, click on the debug icon at the top left of the CCS window. Make sure a USB cable is connected to
the top of the board for debugging. Note: A second USB cable (not provided) is required in order to
perform the air mouse functions. Plug the second cable into the side USB device port. Either USB
connection may be used to power the board.
Figure 10.
CCS then downloads the program to the LaunchPad and opens the Debug Perspective.
12
BOOSTXL-SENSHUB Sensor Hub BoosterPack Getting Started Guide
SPMU295 – April 2013
Copyright © 2013, Texas Instruments Incorporated