Freescale Semiconductor FRDM-FXS-MULTI 数据表

下载
页码 42
Freescale Semiconductor
Document Number: MPL3115A2
Data Sheet:Technical Data
Rev 3.0, 12/2013
An Energy Efficient Solution by Freescale
© 2011-2013 Freescale Semiconductor, Inc. All rights reserved.
 
Xtrinsic MPL3115A2 I
2
C Precision 
Altimeter
The Xtrinsic MPL3115A2 employs a MEMS pressure sensor with an I
2
interface to provide accurate Pressure/Altitude and Temperature data. The 
sensor outputs are digitized by a high resolution 24-bit ADC. Internal processing 
removes compensation tasks from the host MCU system. Multiple user-
programmable, power saving, interrupt and autonomous data acquisition modes 
are available, including programmed acquisition cycle timing, and poll-only 
modes. Typical active supply current is 40 
μA per measurement-second for a 
stable 10 cm output resolution. 
The MPL3115A2 is offered in a 5 mm x 3 mm x 1.1 mm LGA package and 
specified for operation from -40 
°C to 85 °C. Package is surface mount with a 
stainless steel lid and is RoHS compliant.
Features
1.95 V to 3.6 V Supply Voltage, internally regulated by LDO
1.6 V to 3.6 V Digital Interface Supply Voltage
Fully Compensated internally
Direct Reading, Compensated
– Pressure: 20-bit measurement (Pascals)
– Altitude: 20-bit measurement (meters)
– Temperature: 12-bit measurement (degrees Celsius)
Programmable Events
Autonomous Data Acquisition
Resolution down to 0.1 m
32-Sample FIFO
Ability to log data up to 12 days using the FIFO
1 second to 9 hour data acquisition rate 
I
2
C digital output interface (operates up to 400 kHz)
Application Examples
High Accuracy Altimetry
Smartphones/Tablets
Personal Electronics Altimetry
GPS Dead Reckoning 
GPS Enhancement for Emergency Services
Map Assist, Navigation
Weather Station Equipment
ORDERING INFORMATION
Device Name
Package Options
Case No.
# of Ports
Pressure Type
Digital 
Interface
None
Single
Dual
Gauge
Differential
Absolute
MPL3115A2
Tray
2153
MPL3115A2R1
Tape & Reel (1000)
2153
MPL3115A2
50 to 110 kPa
Top View
LGA PACKAGE
5.0 mm x 3.0 mm x 1.1 mm
1
INT1
SDA
V
DD
CAP
V
DDIO
GND
INT2
SCL
2
3
4
8
7
6
5
Pin Connections