Freescale Semiconductor Kinetis Freedom Board FRDM-KE02Z FRDM-KE02Z FRDM-KE02Z 数据表
产品代码
FRDM-KE02Z
MKE02P64M20SF0
KE02 Sub-Family
Supports the following:
MKE02Z16VLC2(R),
MKE02Z32VLC2(R),
MKE02Z64VLC2(R),
MKE02Z16VLD2(R),
MKE02Z32VLD2(R),
MKE02Z64VLD2(R),
MKE02Z32VLH2(R),
MKE02Z64VLH2(R),
MKE02Z32VQH2(R), and
MKE02Z64VQH2(R)
Key features
• Operating characteristics
– Voltage range: 2.7 to 5.5 V
– Flash write voltage range: 2.7 to 5.5 V
– Temperature range (ambient): -40 to 105°C
– Flash write voltage range: 2.7 to 5.5 V
– Temperature range (ambient): -40 to 105°C
• Performance
– Up to 20 MHz ARM® Cortex-M0+ core
– Single cycle 32-bit x 32-bit multiplier
– Single cycle I/O access port
– Single cycle 32-bit x 32-bit multiplier
– Single cycle I/O access port
• Memories and memory interfaces
– Up to 64 KB flash
– Up to 256 B EEPROM
– Up to 4 KB RAM
– Up to 256 B EEPROM
– Up to 4 KB RAM
• Clocks
– Oscillator (OSC) - loop-controlled Pierce
oscillator, crystal or ceramic resonator range of
31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz
31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz
– Internal clock source (ICS) - internal FLL with
internal or external reference, precision
trimming of internal reference allowing 1%
deviation across temperature range of 0 °C to
70 °C and 1.5% deviation across temperature
range of -40 °C to 105 °C, up to 20 MHz
trimming of internal reference allowing 1%
deviation across temperature range of 0 °C to
70 °C and 1.5% deviation across temperature
range of -40 °C to 105 °C, up to 20 MHz
– Internal 1 kHz low-power oscillator (LPO)
• System peripherals
– Power management module (PMC) with three
power modes: Run, Wait, Stop
– Low-voltage detection (LVD) with reset or
interrupt, selectable trip points
– Watchdog with independent clock source
(WDOG)
– Programmable cyclic redundancy check module
(CRC)
– Serial wire debug interface (SWD)
– Bit manipulation engine (BME)
– Bit manipulation engine (BME)
• Security and integrity modules
– 64-bit unique identification (ID) number per chip
• Human-machine interface
– Up to 57 general-purpose input/output (GPIO)
– Two 8-bit keyboard interrupt modules (KBI)
– Interrupt (IRQ)
– Two 8-bit keyboard interrupt modules (KBI)
– Interrupt (IRQ)
• Analog modules
– One 16-channel 12-bit SAR ADC, operation in
Stop mode, optional hardware trigger (ADC)
– Two analog comparators containing a 6-bit
DAC and programmable reference input
(ACMP)
(ACMP)
• Timers
– One 6-channel FlexTimer/PWM (FTM)
– Two 2-channel FlexTimer/PWM (FTM)
– One 2-channel periodic interrupt timer (PIT)
– One real-time clock (RTC)
– Two 2-channel FlexTimer/PWM (FTM)
– One 2-channel periodic interrupt timer (PIT)
– One real-time clock (RTC)
Freescale Semiconductor
Document Number MKE02P64M20SF0
Data Sheet: Technical Data
Rev 3, 07/2013
Freescale reserves the right to change the detail specifications as may be
required to permit improvements in the design of its products.
required to permit improvements in the design of its products.
© 2013 Freescale Semiconductor, Inc.