Freescale Semiconductor CodeWarrior Gigabit Tap Base Kit CWH-GTP-BASE-HE CWH-GTP-BASE-HE 用户手册
产品代码
CWH-GTP-BASE-HE
Freescale Semiconductor
Document Number: AN4384
Application Note
Rev. 0, 07/2012
© 2012 Freescale Semiconductor, Inc.
Configuring the CodeWarrior Tools to
Debug a BSC9131RDB Board
Debug a BSC9131RDB Board
by Freescale Semiconductor, Inc.
Austin, TX
This application note describes how to configure
the Freescale CodeWarrior tools to support
developing and debugging of embedded
software on the BSC9131RDB board.
the Freescale CodeWarrior tools to support
developing and debugging of embedded
software on the BSC9131RDB board.
Because the QorIQ Qonverge BSC9131
processor contains two disparate processor
cores, writing software for the part requires two
different sets of CodeWarrior tools: one to
manage the DSP core, and another to manage
the system core. Care must be taken to ensure
that the two sets of tools do not interact with
each other. Both the proper configuration
sequences and the potential pitfalls are
described here.
processor contains two disparate processor
cores, writing software for the part requires two
different sets of CodeWarrior tools: one to
manage the DSP core, and another to manage
the system core. Care must be taken to ensure
that the two sets of tools do not interact with
each other. Both the proper configuration
sequences and the potential pitfalls are
described here.
This application note assumes the use of
CodeWarrior for StarCore DSPs v10.2.10 or
later, and CodeWarrior for Power Architecture®
v10.1.2 or later.
CodeWarrior for StarCore DSPs v10.2.10 or
later, and CodeWarrior for Power Architecture®
v10.1.2 or later.
Contents