Bauser 661.6 Operating hours timer 661.6/08 数据表
产品代码
661.6/08
6-16
6-11
type 660.5, 665.6
With its overall height of 55, 60 or 64 mm it is an ideal counter program for DIN rail
mounting. A part of these AC or DC counters are produced with two decimals and
special terminals (lift principle) values in just one single housing.
mounting. A part of these AC or DC counters are produced with two decimals and
special terminals (lift principle) values in just one single housing.
Find pulse counter as single counter on page 7-1.
counting range
overall height in mm
terminal “Lift“-terminal
55 60
64 connection connection
99999,9 h
99999,99 h
99999,99 h
AC
DC
660.5
665.5
661.6
666.6
661.7
666.7
type 661.6, 661.7,666.6, 666.7
housing:
gearing:
counting range:
digits:
voltages:
special voltages:
(additional charge)
(additional charge)
voltage tolerance:
frequency:
current consump.:
protection
(front):
(front):
ambient temp.:
stocking temp.:
elec. connection:
(see table above)
vibration resist.:
shock resistance:
EMC:
industrial norm:
reset:
weight:
approval:
fixing:
AC
DC
plastic light grey RAL 7035
plastic light grey RAL 7035
plastic
plastic
see table above
see table above
1,8 x 3,6 mm, white on black,
1,8 x 3,6 mm, white on black,
Decimals black on white
Decimals black on white
115 or 230 V AC
12 - 24 V DC
12, 24, 48, 400 V AC
± 10 %
± 10 %
50 or 60 Hz (on request 20 to 100 Hz)
approx. 5-15 mA
approx. 5-15 mA
IP 65, screws IP 20
IP 65, screws IP 20
- 10° C to + 70° C
- 10° C to + 70° C
- 40° C to + 80° C
- 40° C to + 80° C
Terminal Blocks (lift principle) with
Terminal Blocks (lift principle) with
Philips-Head-Screw (+/- screw) in
Philips-Head-Screw (+/- screw) in
combination with slotted screw
combination with slotted screw
with 3 mm screwdriver size, 0-2.5 mm
2
with 3 mm screwdriver size, 0-2.5 mm
2
fine wire or 0-4 mm
2
single wire
fine wire or 0-4 mm
2
single wire
1 g (10...500 Hz) acc. to EN 60068-2-34
1 g (10...500 Hz) acc. to EN 60068-2-34
30 g (18 ms) acc. to EN 60068-2-27
30 g (18 ms) acc. to EN 60068-2-27
25 g (6 ms) acc. to EN 60068-2-29
25 g (6 ms) acc. to EN 60068-2-29
EN 55011, EN 61000-6-2
EN 55011, EN 61000-6-2
EN 61010, protection class II
EN 61010, protection class II
without
without
approx. 75 g
approx. 75 g
snap-on fixing for DIN-rail
snap-on fixing for DIN-rail
according to DIN EN
according to DIN EN
Technical specifications:
Drawings:
type 661/666
type 660/665
type 661/666
Electromechanical hour counters
register operating and service times.
Hour counter for DIN rail mounting, for AC or DC, overall height: 55, 60 or 64 mm