Renkforce UM-80 KONFERENZ-MIKROFON UM-80 用户手册

产品代码

UM-80

Commissioning

Never point the microphone onto sound openings of loudspeakers, since

this may lead to acoustic feedback, which may damage the loudspeaker
and the computer connected.

• Place the microphone on a flat, clean surface
• Position the microphone as centrally as possible, if you and several other persons

want to share it simultaneously.

•  Turn down the volume on the computer.
•  Connect the USB plug to a free USB port on your computer.
•  Wait until your operating system has recognised and installed the new hardware.

This takes place automatically.

•  If necessary, set up the product as an audio resource on your computer.
•  If necessary run the appropriate software for sound recordings.
•  Adjust the volume of the computer that has the microphone connected to it.
•  Unplug the product after use.

Maintenance and Cleaning

The conference microphone is maintenance-free.
Please use a soft, dry or slightly damp cloth for cleaning.
Never use aggressive cleaning agents or chemical solutions; this may damage the

surface of the casing.

Disposal

Electronic devices are recyclable material and must not be disposed of in

the household waste!

Please dispose of the product according to the current statutory require-

ments at the end of its service life.

Technical Data

System requirements ................................Windows

98SE and later

Connection ..................................................USB
Operating voltage.......................................5 V/DC (via USB)
Power consumption ..................................max. 30 mA
Frequency range ........................................50-20000 Hz
Sensitivity ....................................................-40 dB (0 dB = 1 V/Pa at 1 kHz)
Omnidirectional characteristic ................Ball
Dimensions..................................................60 x 67 x 135 mm
Weight ..........................................................85 g
Cable length ................................................approx. 1.5 m
Operating temperature range ..................-10 to +55 °C
Operating humidity.....................................0 - 65 %
Storage temperature range......................-20 to +70 °C
Storage humidity ........................................0 - 95 %

G Operating instructions

UM-80 Conference Microphone

Item no. 1269654

Intended use

The microphone is intended to convert acoustic signals (sound waves) into electrical

signals. It supports conferences, podcast productions, multimedia presentations and

similar applications.
The USB port may only be connected to appropriate USB ports of computers.
Any use other than as described above is not permitted and can damage the product.

In addition, it can lead to hazards such as short-circuit, fire, etc.
Read the operating instructions carefully and keep them for later reference. If you

pass the product on to a third party, please hand over these operating instructions

as well.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All

names of companies and products are the trademarks of the respective owners. All

rights reserved.

Package contents

• Microphone
• Operating instructions

Safety Instructions

First, read the complete operating instructions carefully, as they contain
important information about proper operation of the device.

Damage due to failure to follow these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!

We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions! In such
cases, the warranty will be null and void!

• For safety reasons, any unauthorised conversion and/or modification to

the product are not permitted.

• When connecting the microphone, pay attention to the safety instructions

of the device to which it is to be connected.

• Do not expose the product to high temperatures, strong vibrations, drip-

ping water or water spray.

• Use the product only in moderate climates and not in a tropical climates.

• This product is not a toy and should be kept out of reach of children.

• Don’t leave packaging material lying around carelessly; it may become a

dangerous plaything for children.

• Handle the product with care; it can be damaged by impact, blows, or ac-

cidental drops, even from a low height.

• Also observe any further safety instructions in the individual chapters of

these operating instructions.

• In commercial institutions, the accident prevention regulations of the Em-

ployer’s Liability Insurance Association for Electrical Systems and Operat-

ing Facilities are to be observed.

• If you are unsure how to connect the product properly, or should you

have any questions that are not answered in these operating instructions,

please contact our technical service or consult a professional.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent