Redpitaya RED PITAYA, OPEN SOURCE LAB RED Pitaya V 1.1 数据表
产品代码
RED Pitaya V 1.1
17
4 Web applications
When user connects to a Red Pitaya unit through a WEB browser a list of locally installed
applications is visualized (see Figure 8). Applications can be started by clicking the “RUN” button.
To install new applications refer to Chapter 5.
applications is visualized (see Figure 8). Applications can be started by clicking the “RUN” button.
To install new applications refer to Chapter 5.
4.1 Oscilloscope
application
This application turns your Red Pitaya into two channel time domain signal visualization system.
The main part of the application is the plot area where 2 RF input signals are presented. The user
can control how the traces are visualized through the buttons on the top of the plot area (see Figure
9). Other options are available in the drop down menus on the right side, see Table 4 for details.
Screenshots were taken from a PC browser. The layout may differ on other devices/browsers.
The main part of the application is the plot area where 2 RF input signals are presented. The user
can control how the traces are visualized through the buttons on the top of the plot area (see Figure
9). Other options are available in the drop down menus on the right side, see Table 4 for details.
Screenshots were taken from a PC browser. The layout may differ on other devices/browsers.
Figure 9: Oscilloscope application.