Testo testo 476 Tachometer, 30 - 12 500 rpm 0563 4760 数据表
![Testo](https://files.manualsbrain.com/attachments/829f9a88db083bd4dd7f7522fc5a4b35c50fa2b5/common/fit/150/50/92b73a74144c8859b9724c051b7feb109bc4ae504059ec11787217f41cba/brand_logo.gif)
产品代码
0563 4760
7. Error messages
11
E1: Front bezel is not fastened correctly. If the E1 messa-
ge appears, the instrument must be switched off.
Remove the front bezel screw, reseat the reflector
and tighten the front bezel screw (
Remove the front bezel screw, reseat the reflector
and tighten the front bezel screw (
).
Underside:
8. External triggering
The
testo 476
can be externally triggered.
The EXTERNAL TRIGGER jack is DTL/ TTL compatible. It
detects a square-wave signal of 0 to +5 volts which is at
least 800nsec in duration.
The EXTERNAL TRIGGER jack uses a standard 1/8” phono
plug (max. cable length 3m, shielded cable is recommen-
ded) with the configuration shown below (only valid for
supplied plug!):
detects a square-wave signal of 0 to +5 volts which is at
least 800nsec in duration.
The EXTERNAL TRIGGER jack uses a standard 1/8” phono
plug (max. cable length 3m, shielded cable is recommen-
ded) with the configuration shown below (only valid for
supplied plug!):
The outer connection (barrel) is common.
The middle connection provides an unregulated direct
voltage output (6 - 7.5 VDC, R
voltage output (6 - 7.5 VDC, R
i
= 100
W) to drive exter-
nal sensors which are not self-powered.
The center connection is the input signal, which triggers
the flash.
the flash.
NOTES:
Turn the Pocket-Strobe off when inserting or removing a
trigger cable.
Whenever an external trigger is used, the Flash
Adjustment Knob is disabled.
trigger cable.
Whenever an external trigger is used, the Flash
Adjustment Knob is disabled.
WARNING:
Do not trigger the device with signals over 208 Hz.
EXT illuminates when External
Trigger Jack is plugged.
Trigger Jack is plugged.