Ideal Networks SignalTEK IICable length meter, R156000 用户手册
产品代码
R156000
156810 Iss 2
SignalTEK II
Page 12
User Guide
Ports
From the home screen press the soft key
PORTS (F2), highlight the required port and
press ENTER (Fig 11).
PORTS (F2), highlight the required port and
press ENTER (Fig 11).
Tick the check box to always see this screen at
startup.
startup.
NOTE
Testing over fiber is available with the
SignalTEK II FO only.
SignalTEK II FO only.
Fig 11
Replaceable insert
– RJ-45 socket
To replace a damaged or worn RJ-45 socket insert proceed as follows:
Equipment required: Kit, IDEAL part number 150058
– includes Tool x1 and Replacement Insert x10.
1. Switch the SignalTEK II off.
2. Remove cables.
2. Remove cables.
3. Carefully push the tool STRAIGHT into the socket. BE CAREFUL - DO NOT MOVE THE
TOOL VERTICALLY!
TOOL VERTICALLY!
4. Keeping the tool STRAIGHT firmly pull the insert out from the socket.
5. Using fingers replace a new insert STRAIGHT into the socket and secure in place by firmly
pushing
pushing
3.
4.
5.
Fig 12