Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502 数据表
产品代码
1726 502
4
UsbCom Standard / Professional 2.1
©
Software
Start program
After starting the program a status window will appear.
In this status window you can instantly see whether a measuring device has been connected and recognized (a
colour signal field in the top right hand corner of the window) as well as the last transferred measured value will
appear.
This window must always be open so that the measured values can be transferred to a text file, into Microsoft Excel
or via a keyboard code!
In this status window you can instantly see whether a measuring device has been connected and recognized (a
colour signal field in the top right hand corner of the window) as well as the last transferred measured value will
appear.
This window must always be open so that the measured values can be transferred to a text file, into Microsoft Excel
or via a keyboard code!
With a double click upon the status window the configuration window will then open.
In this configuration window the connected measuring devices will be displayed and configured. Normally, after the
first installation only the free serial COM interface will be shown, as long as the computer being used has further
COM interfaces.
first installation only the free serial COM interface will be shown, as long as the computer being used has further
COM interfaces.
Now, you can plug in the USB data cable, please follow the instructions regarding the driver installation contained
in the brief guide. Once the driver is successfully installed, the new connected measuring device will appear in the
configuration window. With multiple USB data cables repeat these steps accordingly (with UsbCom Professional
only).
in the brief guide. Once the driver is successfully installed, the new connected measuring device will appear in the
configuration window. With multiple USB data cables repeat these steps accordingly (with UsbCom Professional
only).
When the driver installation of the data cable is successfully installed, the new measuring device will appear in
the configuration window, along with the description of the connected USB data cable and a description of the
measuring device. In order to activate the new data cable go to the Measuring Instruments menu and select
Refresh. The connected measuring device can be edited.
the configuration window, along with the description of the connected USB data cable and a description of the
measuring device. In order to activate the new data cable go to the Measuring Instruments menu and select
Refresh. The connected measuring device can be edited.