Eschenbach 40 x 3320 3320 数据表
产品代码
3320
- 16 -
Now slide the illumination unit holder side-
•
ways onto the accessory.
Allow the illumination unit
•
s
to snap into
the holder and then adjust the unit up for
illuminating the object.
illuminating the object.
Finally, place the microscope head back
•
onto the table stand column and lock it with the securing wheel u.
Place the cap screw o back on the column and screw it down firmly.
Insert the power adapter of the illumination unit into a properly installed
Place the cap screw o back on the column and screw it down firmly.
Insert the power adapter of the illumination unit into a properly installed
•
mains power socket.
Activate the On/Off switch to switch the illumination unit
Activate the On/Off switch to switch the illumination unit
•
a
on.
After use, switch the illumination unit off by activating the On/Off switch.
•
Transmitted light operation
Transmitted light operation
Slide the illumination unit
•
s
into the receiver opening f on the table stand
located below the object bearer disc. Thereby, the bulb must be directed
upwards.
For transmitted light operation use the supplied object bearer disc made
upwards.
For transmitted light operation use the supplied object bearer disc made
•
of glass.
Insert the power adapter of the illumination unit into a properly installed
Insert the power adapter of the illumination unit into a properly installed
•
mains power socket.