Radex RD1706 Radiation Monitor RD1706 数据表
产品代码
RD1706
«Background» mode
25
Switching the device from «Background» to «Monitoring» mode is
done in «BACKGROUND» section (page 1 ) by placing «
» icon
opposite to « OFF ».
The rules and sequence of defining the average value of background
dose rate are covered on page 2 .
8
9
This mode is convenient for examining inside the buildings.
In «Background» mode the estimation of the radiation dose rate is
similar to the one in «Monitoring» mode (page 1 ), yet the display gives not
just one but two indications. One stands for exceeding of a dose rate over
background dose rate, the second is for a background dose rate. This mode is
convenient for examining inside buildings, when it is necessary to know
how indications indoors differ from the ones outdoors.
just one but two indications. One stands for exceeding of a dose rate over
background dose rate, the second is for a background dose rate. This mode is
convenient for examining inside buildings, when it is necessary to know
how indications indoors differ from the ones outdoors.
The actuation of the «Background» mode and evaluating background
dose rate are given in «BACKGROUND» section (page 1 ). In
«Background» mode screen RD1706 has the same view as in «Monitoring»
mode but after the end of estimation cycle two values are displayed:
«Background» mode screen RD1706 has the same view as in «Monitoring»
mode but after the end of estimation cycle two values are displayed:
3
8
That a dose rate value in this example
equals to 0,0 + 0,10 = 0,1 μSv/h.
equals to 0,0 + 0,10 = 0,1 μSv/h.
7
7
2
1
When the value of the radiation dose
rate is less than of a background, the
value «0,00» and the icon «
rate is less than of a background, the
value «0,00» and the icon «
» are
displayed.
2
.- value of a background dose rate (in the example it
is 0,10 μSv/h)
1
.-
7
exceeding of a dose rate over background dose rate (in the
example it is 0,0 μSv/h)