Gw Instek GSP-830Spectrum analyzer, spectrum analyzerBandwidth (RBW) 3/30/300 kHz/4 MHz GSP-830 数据表
产品代码
GSP-830
SEQUENCE
137
Edit Sequence
1. Select
sequence
1. Press the Sequence key. The
display enters into the
sequence edit mode.
sequence edit mode.
Seq
2. Press F1 (sequence 1 to 5) or
F2 (sequence 6 to 10)
repeatedly to select the
sequence ID.
repeatedly to select the
sequence ID.
Select Seq
6 7 8 9 10
F 2
Select Seq
1 2 3 4 5
F 1
2. Start editing
1. Press F3 (Edit).
Edit...
F 3
2. Press F1 (Start Edit).
Start Edit
F 1
3. The Start Edit sign in the
mid-right of the display turns
green.
green.
Start Edit
2a. Add step
20 steps are available for each sequence. Every key
operation can be recorded as a step.
Press the Enter key each time to confirm step entering.
(In some cases this is not necessary: check if the item
appears in the window).
operation can be recorded as a step.
Press the Enter key each time to confirm step entering.
(In some cases this is not necessary: check if the item
appears in the window).
Example: Activate system auxiliary
signal
signal
1. Press the System key.
2. Press F4 (Aux Sig On).
3. Press the Enter key.
2. Press F4 (Aux Sig On).
3. Press the Enter key.
System
Aux Sig
On Off
F 4
Example: Run Autoset
1. Press the Autoset key.
2. Press F1 (Autoset).
3. Press the Enter key.
2. Press F1 (Autoset).
3. Press the Enter key.
Autoset
Autoset
F 1
The result looks like this.
Aux Sig On
Autoset