Bender VMD4105-D-2 B93010045 数据表

Operation and configuration

30

In the standard display, phase voltages, line conductor voltages, the maxi-
mum 10-minute average value (depending on standard) and the frequency 
are indicated on the display.

Standard display: Toggling between standard display and 
device information
Menu display: To exit the parameter setting menu without 
storing; to go to the next higher menu level

Standard display: A manual test is carried out using the 
test button (> 1.5 s), during which both alarm relays are 
triggered (trigger test for testing the coupling switches). In 
addition, fault simulation will be carried out (disconnection 
time documented)
Menu display: Arrow up button for parameter change and 
scrolling

Standard display: (> 1.5 s) Acknowledgement of fault 
messages from contact monitoring
Menu display: Arrow down button for parameter change/
scrolling

Standard display: Toggling between standard, menu and 
alarm display

Menu display:  

button

Jump to parameter settings; saving the changed para-
meters

L1-N 229.9V

L1-L2 397.2V

L2-N 229.5V

L2-L3 401.9V

L3-N 232.9V

L3-L1 400.1V

U10  57.3V

f          50.00Hz