Bender VMD4105-D-2 B93010045 数据表
产品代码
B93010045
Operation and configuration
37
5.4.3
Settings
Settings can be password protected. If the password is activated (enabled), all
settings continue to be displayed. When an attempt is made to change set-
tings, the password entry screen appears automatically:
settings continue to be displayed. When an attempt is made to change set-
tings, the password entry screen appears automatically:
Once a valid password has been entered, access will be granted to settings in
all menus (except the Service menu) until menu mode is exited.
If you can't remember your password, contact the Bender Service.
In principle, all preset response values can be changed, if this should be nec-
essary. The values can be changed in the third level of the menu (column
"twice
all menus (except the Service menu) until menu mode is exited.
If you can't remember your password, contact the Bender Service.
In principle, all preset response values can be changed, if this should be nec-
essary. The values can be changed in the third level of the menu (column
"twice
") using
.
There are two different ways to exit the setting menu:
Save and exit: „
“
Exit without saving: "ESC"
The menu structures in the settings contain different entries for each individ-
ual standard. These are listed in detail in "Chapter 7. Selectable default set-
tings".
ual standard. These are listed in detail in "Chapter 7. Selectable default set-
tings".
Response values for NS protection may only be changed in
consultation with the network operator!
consultation with the network operator!
Please enter
password:
0 0 0