Bauser 663.6 Adjustable impulse counter (663, 6, 08) Assembly dimensions 36 x 24 mm 663.6/08 数据表
产品代码
663.6/08
6-16
7-1
Electromechanical pulse counters register quantities and therefore document pro-
duction results or operating cycles. These are units for DIN-rail mounting with over-
all height of 55, 60 or 64 mm and on request with additional time counter available.
duction results or operating cycles. These are units for DIN-rail mounting with over-
all height of 55, 60 or 64 mm and on request with additional time counter available.
type 160.5, 165.5
type 663.6, 663.7, 668.6, 668.7
overall height in mm
terminal “Lift“- terminal
55
60 64
connection connection
AC
DC
160.5
165.5
663.6
668.6
663.7
668.7
Technical specifications:
Drawings:
type 663/668
type 160/165
type 663/668
Electromechanical pulse counters
register quantities and therefore make production clear.
Pulse counter and hour counter combinations for DIN-rail mounting in AC or DC version
housing:
gearing:
counting range:
max. frequency:
digits:
voltages:
special voltages:
(additional charge)
(additional charge)
voltage tolerance:
frequency:
current consump.:
protection
(front):
(front):
ambient temp.:
stocking temp.:
elec. connection:
(see table above)
vibration resist.:
shock resistance:
EMC:
industrial norm:
reset:
weight:
approval:
fixing:
AC
DC
plastic light grey RAL 7035
plastic light grey RAL 7035
plastic
plastic
9999999
9999999
10 pulses/sec max. duty cycle 100%
10 pulses/sec max. duty cycle 100%
1,8 x 3,6 mm, white on black,
1,8 x 3,6 mm, white on black,
115 or 230 V AC
12 - 24 V DC
24, 42, 48, 400 V AC
on request
± 10 %
± 10 %
50/60 Hz
approx. 5-15 mA
approx. 5-15 mA
IP 65, screws IP 20
IP 65, screws IP 20
- 10° C to + 70° C
- 10° C to + 70° C
- 40° C to + 80° C
- 40° C to + 80° C
Terminal Blocks (lift principle) with
Terminal Blocks (lift principle) with
Philips-Head-Screw (+/- screw) in
Philips-Head-Screw (+/- screw) in
combination with slotted screw
combination with slotted screw
with 3 mm screwdriver size, 0-2.5 mm
2
with 3 mm screwdriver size, 0-2.5 mm
2
fine wire or 0-4 mm
2
single wire
fine wire or 0-4 mm
2
single wire
1 g (10...500 Hz) acc. to EN 60068-2-34
1 g (10...500 Hz) acc. to EN 60068-2-34
30 g (18 ms) acc. to EN 60068-2-27
30 g (18 ms) acc. to EN 60068-2-27
25 g (6 ms) acc. to EN 60068-2-29
25 g (6 ms) acc. to EN 60068-2-29
EN 55011, EN 61000-6-2
EN 55011, EN 61000-6-2
EN 61010, protection class II
EN 61010, protection class II
without
without
approx. 75 g
approx. 75 g
snap-on fixing for DIN-rail
snap-on fixing for DIN-rail
according to DIN EN
according to DIN EN