Ferm ATM1050 数据表

1.  Machine data

2.   Safety instructions

3.   Use

4.   Maintenance

Recommended pressure 

2 - 4 bar

Max. pressure 

9 bar

Nozzle ø 

Long : 4.0 mm 

 

Short: 2.0 mm

Weight 

0.15 kg

In this manual and/or on the machine the following 

symbols are used:

•  Avoid too high pressure

•  Never blow or spray in direction of yourself or

others; this could cause serious injury.

•  Keep bystanders and pets away

•  Children and animals should be kept far away

from the area of operation of the machine.

•  If you use the compressor to spray paint:

•  Do not work in enclosed spaces or near naked

flames.

•  Make sure that the environment in which you

will be working has dedicated ventilation.

•  Protect your nose and mouth with a dedicated

mask

•  If the compressor is no longer in use, always

take the plug out of the plug socket.

•  Always make sure that compressed-air hoses

are used for compressed air and which are 

characterised by a maximum pressure 

adjusted to that of the compressor. Do not try

to repair the hose if it is damaged.

Only use the compressor with accessory in a good 

ventilated area.

•  Connect the PU hose between compressor

and accessory

•  Slide the hose-coupler on the accessory until

the coupler clicks. Now the hose is connected 

correctly.

•  To release the coupler, pull the outside ring

backwards.

Always be aware of small particles which can

release and cause injury. Do not point the blow

gun towards yourself during cleaning activities.

Should a fault occur, e.g. after wear of a part,

please contact the service address on the

warranty card. 

To prevent damage during transport, the appliance

is delivered in a solid packaging which consists

largely of reusable material. Therefore please

make use of options for recycling the packaging.

For the conditions of guarantee, please refer to the

separately provided guarantee card.