Holzmann Maschinen H020300027 数据表
SAFETY
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Seite 20
MAGNETBOHRMASCHINE / MAGNETIC DRILL MBM 450LRE / MBM 600LRE
to the manual. Check cables and extended ones timely; change the cables if they are
destroyed. Clean handgrips of tools and keep them dry and from oil.
destroyed. Clean handgrips of tools and keep them dry and from oil.
Cut off electric source in time: Keep the habit of cutting off electric source in time before
having a rest or changing accessories of aiguilles etc.
having a rest or changing accessories of aiguilles etc.
Take down spanners: You must take down adjustive spanners etc. before operating
machines.
machines.
In case of starting wrongly: Don’t put your hands on the button of “on” and “off ” when
moving the tool which is connected with electric source. The switch must be set in “off”
before connecting with electric source.
moving the tool which is connected with electric source. The switch must be set in “off”
before connecting with electric source.
Outdoor extended cables: You should use regular extended cables for outdoors when
working outdoor.
working outdoor.
Keep vigilance: Keep your brain sober when working. Don’t operate dynamoelectric tools
when feeling tired.
when feeling tired.
Check broken parts and accessories: Operators should carefully check whether every part,
every accessory or every protecting equipment has been broken before intermittently
using dynamoelectric tools in order to decide whether such objects perform again. Check
whether running parts are normal and other condition which influences operation.
Operators should go to service centers to replace parts if they are destroyed unless these
are other items in the manual. Please make the technicians repair switches if they don’t
work.
every accessory or every protecting equipment has been broken before intermittently
using dynamoelectric tools in order to decide whether such objects perform again. Check
whether running parts are normal and other condition which influences operation.
Operators should go to service centers to replace parts if they are destroyed unless these
are other items in the manual. Please make the technicians repair switches if they don’t
work.
Advise: It’s easy to cause broken tools, even personal hurt if you don’t use accessories
from original Company.
from original Company.
Electric pressure: Pay attention to match electric pressure with electric pressure on the
nameplates of tools(±5%).It’s possible to cause danger and ruin tools when working
electric pressure is higher than available electric pressure of tools. When working electric
pressure is lower than available electric pressure of tools, it’s possible to damage motors
nameplates of tools(±5%).It’s possible to cause danger and ruin tools when working
electric pressure is higher than available electric pressure of tools. When working electric
pressure is lower than available electric pressure of tools, it’s possible to damage motors
11.4
Product specific rules of security
Read carefully the specifications and understand the characteristics and operational
instructions of the magnetic drill.The operator must receive and pass the technical training
before going on duty.
instructions of the magnetic drill.The operator must receive and pass the technical training
before going on duty.
Confirm the voltage before using. The operating voltage can not be lower or higher by
more than 5%. If it does exceed the yardstick, it will burn the motor and cause creepage
accident.
more than 5%. If it does exceed the yardstick, it will burn the motor and cause creepage
accident.
The operator must wear safety helmet, insulating gloves and working clothes(The operator
can not wear loose clothes)and can not wear hanging ornaments and ecpose the long hair
outside, in case of being wraped.
can not wear loose clothes)and can not wear hanging ornaments and ecpose the long hair
outside, in case of being wraped.
Please notice not to let water into the motor or things to block the air-way, in case that
the heat dispersion of the motor and burn the motor.
the heat dispersion of the motor and burn the motor.
Make sure whether the bore has danger, such as high-voltage line, gas
When the magnetic drill drills through armor plate, please notice the safety of the people
and properties below. When drilling the metal beam-column, notice the safety of the
building structure.
and properties below. When drilling the metal beam-column, notice the safety of the
building structure.
The magnetic drill can not work under dangerous environment, especially in flammable
and explosive environment. The workplace must have good lighting condition and be tidy
and neat.
and explosive environment. The workplace must have good lighting condition and be tidy
and neat.
Start no-load the magnetic drill in any condition. Prohibit starting it with load on in case
damaging the magnetic drill. Pay attention to the stability of the magnetic drill when in
aloft work, in case that the magnetic drill falls down.
damaging the magnetic drill. Pay attention to the stability of the magnetic drill when in
aloft work, in case that the magnetic drill falls down.
The power line should fit for the quadded rubber cable specified by the safe instructions.
Make sure the ground wire is rightly connectde to the ground.
Make sure the ground wire is rightly connectde to the ground.
Cut the power off before installing or moving the magnetic drill.
Lift up the magnetic drill when moving it, in case of damaging it.