Kingston Technology 2GB, 800MHz, DDR2, Non-ECC, Low-Latency, CL4 (4-4-4-12), FBDIMM (Kit of 2) KHX6400F2LLK2/2G 数据表

产品代码

KHX6400F2LLK2/2G

Memory Module Specifications

Document No. 4804949-001.A00

04/05/08

Page 1

Kingston's KHX6400F2LLK2/2G is a kit of two low-latency 128M x 72-bit 1GB (1024MB) DDR2-800 CL4

dual rank ECC SDRAM (Synchronous DRAM) fully-buffered memory modules, based on eighteen

64M x 8-bit DDR2 FBGA components per module. Total kit capacity is 2GB (2048MB). Each module pair

has been tested to run at DDR2 800MHz at low latency timing of 4-4-4-12 at 2.0V. The SPD is programmed

to JEDEC standard latency 800Mhz timing of 5-5-5-15 at 1.8V. Each 240-pin FBDIMM uses gold contact

fingers and requires +1.8V. Each FBDIMM also includes an AMB device (Advanced Memory Buffer).

The electrical and mechanical specifications are as follows:

Description:

KHX6400F2LLK2/2G

2GB (1GB 256M x 72-Bit x 2 pcs.) PC2-6400

CL5 ECC 240-Pin FBDIMM Kit

FBDIMM Module: 240-pin

JEDEC Standard: R/C B

Memory Organization: 2 rank of x8 devices

DDR2 DRAM Interface: SSTL_18

DDR2 Speed Grade: 800 Mbps

CAS Latency: 5-5-5 (as programmed in the SPD)

Module Bandwidth: 6.4 GB/s

DRAM: VDD = VDDQ = 1.8V

AMB: VCC = VCCFBD = 1.5V

EEPROM: VDDSPD = 3.3V (typical)

Heat Spreader: Full DIMM Heat Spreader (FDHS)

PCB Height: 51.0mm (including heat spreader), double-sided component

RoHS Compliant

Feature:

Keyed

T E C H N O L O G Y