Medisana MTC 51139 用户手册
产品代码
51139
17
GB
2 Useful Information / 3 Getting Started
3.1
Inserting /
removing batteries
Inserting /
removing batteries
• Measure your blood pressure before meals.
• Before taking readings, allow yourself at least five minutes rest.
• If the systolic and diastolic readings seem unusual (too high or too low) on
• Before taking readings, allow yourself at least five minutes rest.
• If the systolic and diastolic readings seem unusual (too high or too low) on
several occasions, despite correct use of the unit, please inform your doctor.
This also applies to the rare occasions when an irregular or very weak pulse
prevents you from taking readings.
This also applies to the rare occasions when an irregular or very weak pulse
prevents you from taking readings.
Insertion: Open the battery compartment on the underside of the unit by
exerting gentle pressure, and insert the four batteries included with the unit
(alkaline batteries, AA type, LR 6). Remember to insert the batteries as indi-
cated in the diagram in the battery compartment. Replace the lid, pressing it
until it snaps into place.
Removal: When the battery symbol appears in the display, please re-
place the batteries with new ones. After batteries be inserted, the display will
display the defaulted date & time. Set the date and time as described in 3.3 Set
Date and Time. Please note that the date and time will have to be reset each
time new batteries are inserted. The previous measuring results are saved.
exerting gentle pressure, and insert the four batteries included with the unit
(alkaline batteries, AA type, LR 6). Remember to insert the batteries as indi-
cated in the diagram in the battery compartment. Replace the lid, pressing it
until it snaps into place.
Removal: When the battery symbol appears in the display, please re-
place the batteries with new ones. After batteries be inserted, the display will
display the defaulted date & time. Set the date and time as described in 3.3 Set
Date and Time. Please note that the date and time will have to be reset each
time new batteries are inserted. The previous measuring results are saved.
WARNING BATTERY SAFETY INFORMATION
• Do not disassemble batteries!
• Remove discharged batteries from the device immediately!
• Increased risk of leakage, avoid contact with skin, eyes and
• Remove discharged batteries from the device immediately!
• Increased risk of leakage, avoid contact with skin, eyes and
mucous membranes! If battery acid comes in contact with any
of these parts, rinse the affected area with copious amounts of
fresh water and seek medical attention immediately!
of these parts, rinse the affected area with copious amounts of
fresh water and seek medical attention immediately!
• If a battery has been swallowed seek medical attention
immediately!
• Replace all of the batteries simultaneously!
• Only replace with batteries of the same type, never use different
• Only replace with batteries of the same type, never use different
types of batteries together or used batteries with new ones!
• Insert the batteries correctly, observing the polarity!
• Remove the batteries from the device if it is not going to be
• Remove the batteries from the device if it is not going to be
used for an extended period!
• Keep batteries out of children's reach!
• Do not attempt to recharge these batteries! There is a danger of
• Do not attempt to recharge these batteries! There is a danger of
explosion!
• Do not short circuit! There is a danger of explosion!
• Do not throw into a fire! There is a danger of explosion!
• Do not throw used batteries into the household refuse; put
• Do not throw into a fire! There is a danger of explosion!
• Do not throw used batteries into the household refuse; put
them in a hazardous waste container or take them to a battery
collection point, at the shop where they were purchased!
collection point, at the shop where they were purchased!
3 Getting Started
51139_MTC_West_aktual.qxd:Blutdruckmessgerät 07.12.2010 12:03 Uhr Seite 17