Scala SC6800 Blood Pressure Monitor 02479 用户手册
产品代码
02479
Setting the clock
After you have inserte
After you have inserte
d the two batteries, you should set the clock. It starts with year “20XX”,
„1/ 1“ (for the 1st month / 1st day) and “12:00“ o’clock after every battery change.
To set the clock, the device must be OFF. Hold the MEMORY button pressed for about 5
seconds. The year 20XX blinks in the top left corner of the display.
Set the year with the 0/I-START button.
When the correct year is set, press the MEMORY button again. Now the 1 blinks in the top
left corner of the LCD. It stands for the month.
Set the month with the 0/I-START button.
Another press of the MEMORY button sets another 1 blinking. It stands for the first day in
the month.
Set the day with the 0/I-START button.
Another press of the MEMORY button takes you to the clock setting
To set the clock, the device must be OFF. Hold the MEMORY button pressed for about 5
seconds. The year 20XX blinks in the top left corner of the display.
Set the year with the 0/I-START button.
When the correct year is set, press the MEMORY button again. Now the 1 blinks in the top
left corner of the LCD. It stands for the month.
Set the month with the 0/I-START button.
Another press of the MEMORY button sets another 1 blinking. It stands for the first day in
the month.
Set the day with the 0/I-START button.
Another press of the MEMORY button takes you to the clock setting
– the hours blink. As
earlier, set the clock with the 0/I-START button.
Pressing the MEMORY button advances to the minutes setting.
Set the minutes with the 0/I-START button.
A final press of the MEMORY button completes the setting of the date and time.
8
Pressing the MEMORY button advances to the minutes setting.
Set the minutes with the 0/I-START button.
A final press of the MEMORY button completes the setting of the date and time.
8
.
The blood pressure measurement
Now connect the cuff with the instrument by
plugging the air plug at the tube of the cuff
into the socket on the back side of the
instrument (see Figs. 1 and 2). Put the cuff
around your left upper arm in such a way
that the tube is directed towards the bend of
the elbow, with the lower cuff edge ending
about 2-3 cm above the bend of the elbow.
Now connect the cuff with the instrument by
plugging the air plug at the tube of the cuff
into the socket on the back side of the
instrument (see Figs. 1 and 2). Put the cuff
around your left upper arm in such a way
that the tube is directed towards the bend of
the elbow, with the lower cuff edge ending
about 2-3 cm above the bend of the elbow.
The cuff should be reasonably tight.
Pressing the 0/I-START button starts the automatic measurement. The cuff inflates to
approx. 190 mmHg pressure.
The automatic deflation starts the measurement. After about 3 seconds, a heart icon starts
blinking in the LC display. If a Korotkoff’s sound is detected already at that time, it means a
systolic pressure of more than 150 mmHg. Then the monitor re-inflates (to about 220
mmHg).
At the end of the measurement, the result is displayed in the LCD and the cuff deflates and
the measuring value is entered in the memory area.
approx. 190 mmHg pressure.
The automatic deflation starts the measurement. After about 3 seconds, a heart icon starts
blinking in the LC display. If a Korotkoff’s sound is detected already at that time, it means a
systolic pressure of more than 150 mmHg. Then the monitor re-inflates (to about 220
mmHg).
At the end of the measurement, the result is displayed in the LCD and the cuff deflates and
the measuring value is entered in the memory area.
Aborting a measurement
You can stop the measurement at any time by pressing the 0/I-START button. The BP
monitor deflates the cuff instantly.
You can stop the measurement at any time by pressing the 0/I-START button. The BP
monitor deflates the cuff instantly.
9