Analog Devices AD2S1205 Evaluation Board EVAL-AD2S1205SDZ EVAL-AD2S1205SDZ 数据表
产品代码
EVAL-AD2S1205SDZ
AD2S1200/AD2S1205 User Guide
UG-365
Rev. D | Page 3 of 24
Follow these steps to quickly evaluate the
software from the
board is
disconnected from the USB port of the PC while installing
the software. The PC may need to be restarted after the
installation.
the software. The PC may need to be restarted after the
installation.
2. Ensure that the default link options are configured as
outlined in Table 2.
board as shown in Figure 2.
4. Screw the two boards together with the enclosed nylon
screw-nut set to ensure that the boards connect firmly
together.
together.
5. Connect the power supply adapter included in the kit to
Connecter J702 on the
board.
6. Connect the
board to the PC via the
USB cable. For Windows® XP, you may need to search for
the
the
drivers. Choose to automatically
prompted by the operating system.
7. Launch the AD2S1200_05 software from the Analog
Devices subfolder in the Programs menu.
8. Press the RESET button, S1, on the
board.
Figure 2. Hardware Configuration—Setting Up the
10442-
002
9V
DC INPUT
SDP BOARD
USB
INTERFACE
POWER SUPPLIES
INDICATION LEDS
EXCITATION
BUFFER
RESOLVER
INTERFACE
LEVEL
SHIFTERS
AD2S1200/
AD2S1205