Analog Devices ADF4153 Evaluation Board EV-ADF4153SD1Z EV-ADF4153SD1Z 数据表
产品代码
EV-ADF4153SD1Z
UG-167
Evaluation Board User Guide
Rev. A | Page 10 of 24
EVALUATION BOARD SOFTWARE
The control software for the
accompanies
the
on a CD. To install the software, see the
Software Installation section.
To run the software, click the ADI ADF4153-4-6-7 file on the
desktop or in the Start menu.
On the Select Device and Connection tab, choose your device
and your connection method, and click Connect.
Confirm that SDP board connected, ADF4xxx USB Adapter
Board connected, or Analog Devices RFG.L Eval Board
To run the software, click the ADI ADF4153-4-6-7 file on the
desktop or in the Start menu.
On the Select Device and Connection tab, choose your device
and your connection method, and click Connect.
Confirm that SDP board connected, ADF4xxx USB Adapter
Board connected, or Analog Devices RFG.L Eval Board
connected is displayed at the bottom left of the window (see
Figure 17). Otherwise, the software has no connection to the
evaluation board.
Note that, when connecting the board, it takes about 5 sec to
10 sec for the status label to change.
Under the File menu, the current settings can be saved to, and
loaded from, a text file.
Figure 17). Otherwise, the software has no connection to the
evaluation board.
Note that, when connecting the board, it takes about 5 sec to
10 sec for the status label to change.
Under the File menu, the current settings can be saved to, and
loaded from, a text file.
Figure 17. Software Front Panel Display—Select Device and Connection
09157-
017